Sundown Audio SA-8 V.3 D4 8" 500W RMS Dual 4-Ohm SA Series Subwoofer
- SKU #: 00219
Sundown Audio SA-8 V.3 D4 8" 500W RMS Dual 4-Ohm SA Series Subwoofer
The SA line was designed to be the centerpiece of the Sundown Audio subwoofer lineup -- the line to which all of their other lines are compared. They started with an FEA optimized motor design capable of 19mm of one-way Klippel verified excursion and significantly more x-mech (maximum mechanical excursion). This motor was mated to a top quality double layer nomex spider, an SPL competition grade paper cone, and a strong foam surround capable of handling the excursion and force generated by the motor structure. The motor also features dual faraday rings (shorting rings) to reduce inductive distortion. At Sundown Audio this still was not enough so we designed a highly optimized voice coil cooling system that ensures that an SA series woofer will never over-heat when used anywhere close to it's rated power level. This system allows our 2.5" coil to match and exceed the thermal performance of many 3" coil drivers on the market today. This same voice coil cooling system has been applied to all of our larger woofers lines as well due to it's proven effectiveness over the years in the SA series.
All of this hard work and engineering has lead to the incredible reputation now enjoyed by the SA series worldwide. We are very proud of what these woofers are capable of and we believe that they are one of the best woofers on the market today in their price and power range.
Product Features:
- Sundown Audio SA-8 V.3 D4 8" 500W RMS Dual 4-Ohm SA Series Subwoofer
- Power Handling:
- RMS Power = 500 watts
- Voice Coil: Dual 4 ohm
- Vented magnetic gap featuring sixteen chamfered gap vents
- Solid Pole piece with chamfered edges for increased air powered voice coil cooling
- High velocity under-spider frame vents
- Black Aluminum 2” voice coil former for superior heat dissipation
- High Temperature copper voice coil wire
- Large Magnet ID aluminum faraday ring
- Spring Loaded Terminals
- Stitched-On “XL” Tinsel Leads to prevent fatigue and failure
- High strength & patented cast aluminum frame
- Optimized for small, ported enclosures
- Xmax = 16mm one-way by 70% BL
- Cut-out Diameter: 7-3/8"
- Gasket OD: 8-3/8"
- Mounting Depth: 6-5/8"
- Recommended Ported Enclosure: 0.5 - 0.75 ft^3 @ 35hz
- Weight: 27LB
DC Resistance (Re) | Ω | 6.0 |
---|---|---|
Resonance Frequency (Fs) | Hz | 40.0 |
Equivalent Volume (Vas) | L | 7.17 |
Electrical Q Factor (Qes) | 0.392 | |
Mechanical Q Factor (Qms) | 4.310 | |
Total Q Factor (Qts) | 0.360 | |
Force Factor (BL) | NA | 22.06 |
Moving Mass (incl. Air Load) (Mms) | g | 126.6 |
Suspension Compliance (Cms) | mm/N | 125 |
Sensitivity | 1w / 1m | 82.71 dB |
Sealed Enclosure Suggestion | cu. ft. | Not Recommended |
Ported Enclosure Suggestion | cu. ft. | 0.5 - 0.75 @ 35Hz |
Displacement | cu. ft. | 0.08 |
Depth | in | 6.625 |
Outside Diameter | in | 8.375 |
Cutout | in | 7.375 |
Additional Information
-
Audison SR5.600 5-Channel 1000W Amplifier with Crossover
Special Price $549.99
Retail: $715.99
-
Incriminator Audio iX8.1 Monoblock 8000W Amplifier
Special Price $1,949.00
Retail: $2,299.99
-
16-SRX750D.1 - Memphis Monoblock 750W RMS Street Reference Amplifier
Special Price $199.99
Retail: $349.99
-
HD-5 - CDT Audio High Definition 5.25" Midrange/Midbass Drivers
Special Price $199.99
Retail: $249.99
-
Focal FPX 1.1000 Monoblock 1000W RMS Class D Amplifier
Special Price $699.99
Retail: $839.99