Hertz HCP 4M 4-Channel 380W RMS Marine Amplifier
- SKU #: 02807
Descripton:
HCP 4M four channels marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. The HCP 4 M fourchannel model features also an extended frequency range filter, which can be used when designing active 2-way speaker systems.
Specifications:
Channels | 4 - 3 - 2 |
POWER SUPPLY | |
Power supply voltage / fuse: | 11 ÷ 15 VDC / 2 x 20 A |
ldling current (power ON/OFF): | 1 A / 0.04 mA |
Consumption@ 1Ω, 14.4 VDC (Max Musical Power): | 21 A |
Remote In: | 7 ÷ 15 VDC - 1 mA |
ART: | Automatic Remote Turn-OniOff with Speaker-ln |
AMPLIFIER STAGE | |
Distorsion - TliD (100Hz @ 4Ω): | 0.01% |
Bandwidth: | 10 ÷ 45 kHz |
S/N Ratlo (A welghted @ 1 V): | 103 dB |
Damping factor (100Hz @ 4Ω) | 120 |
Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
Speaker-ln sensitivity: | 0.8 ÷ 20 VRMS |
Load impedance (MIN) @4Ch: @3Ch: @2Ch: |
2 Ω + 2 Ω + 4 Ω 2 Ω 4 Ω |
Max size (mm/in): | 315 x 190 x 50 / 12.40 x 7.48 x 1.97 |
Weight (kg/lb): | 2.62 / 5.77 |
Adjustable Crossovers | yes |
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% | |
4Ch | 55 W x 4 (4Ω) |
4Ch | 85 W x 4 (2Ω) |
3Ch | 55 W x 2 (4Ω) + 170 W x 1 (4Ω) |
3Ch | 85 W x 2 (2Ω) + 170 W x 1 (4Ω) |
2Ch | 170 W x 2 (4Ω) |
OUTPUT POWER (RMS) @ 14.4 VDC, THD 10% | |
4Ch | 65 W x 4 (4Ω) |
4Ch | 95 W x 4 (2Ω) |
3Ch | 65 W x 2 (4Ω) + 190 W x 1 (4Ω) |
3Ch | 95 W x 2 (2Ω) + 190 W x 1 (4Ω) |
2Ch | 190 W x 2 (4Ω) |
CEA 2006-A RATINGS | |
RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): | 50 W x 4 Ch |
S/N Ratio (ref. 1 W output) | 82 dBA |
Total Power RMS | 760 W |
INPUTS / FILTERS
lnputs: | PRE IN / SPEAKER IN |
Pre Out FULL range (FRONT) | Yes |
FRONT Ch. filters FULL: | Yes |
Hi-Pass: | 80 Hz @ 12 dB/Oct |
Lo-Pass: | 50 ÷ 500 Hz @ 12 dB/Oct |
REAR Ch. filters FULL: | Yes |
Hi-Pass: | 80 Hz @ 12 dB/Oct |
Lo-Pass: | 50 ÷ 500 Hz @ 12 dB/Oct |
FRONT Ch. MONO (on/off): | Yes |
REAR Ch. MONO (on/off): | Yes |
BOOST 50 Hz (adjust): | (0 / 6 / 12) dB |
Additional Information
-
Morel CCWR-254 2.5" 40W RMS Wide Range Speakers
Special Price $189.99
Retail: $199.99
-
LINE SOURCE - Raven Ribbon Tweeter
Special Price $2,499.99
Retail: $2,999.99
-
Special Price $339.99
Retail: $499.99
-
Incriminator Audio iX1.1 Monoblock 1200W Amplifier
Special Price $389.00
Retail: $499.99
-
SounDigital EVOX2 1200.4-2 Ohm 4-Channel 1200W RMS Bridged Power Car Amplifier
Special Price $699.99
Retail: $999.99