Virtus 602 - Morel Virtus Series 6.5" 2-Way Component System

• Nominal Impedance: 4 Ohms
• Power Handling: 140Wrms
• Max. Trans.Pwr Handling: 300Wrms
• Sensitivity (2.83V/1M): 88dB
• Frequency Response: 55-4000Hz
• Resonant Freq. Fs Hz: 65
• Voice Coil Diameter: 2.1in (54mm)
• Voice Coil Height:0.48in (12mm)
• Voice Coil Type/ Former: Aluminum
• Voice Coil Wire: Hexatech Aluminum
• DC Resistance: 3.5 Ohms
• Voice Coil Induct. @1 kHz: 0.33MH
• Magnet System; Double Ferrite Rear Vented
• HE-Magnetic Gap Height: 0.16in (4mm)
• B-Flux Density (T.M.): 0.65
• BL Product/BXL: 3.41
• Max. Linear Ex./Xmax: ±0.16in (±4mm)
• Suspension Compliance CMS - mm/N: 0.57
• Electrical Q Factor QES: 1.3
• QTS: 0.9
• QMS: 2.88
• Mech.Resistance RMS - Ohm/meter: 1.49
• Moving Mass MMS - gr: 10.67
• Equiv. Can Air Load VAS: 11.38L (0.45cu.ft)
• Effective Piston Area SD: 119sq.cm (18.45sq. inch)
• Cone Type: Formed Paper
• Cone Material: Composite Cellular Fiber
• Unit Diameter: 6.5in (165mm)
• Mounting Depth: 2.36in (61mm)
• Mounting Cutout: 5.55in (141mm)
• Net Weight: 1.61lb (0.739Kg)

Tweeter

• Nominal Impedance: 4 Ohms
• Power Handling: 80WRms
• Max Transient Power Handling W (10ms): 250
• Sensitivity (2.83V/1M): 90dB
• Frequency Response: 1800-22000Hz
• FS: 1150Hz
• Voice Coil Diameter: 1.125in (28mm)
• Voice Coil Former: Aluminum    
• Voice Coil Wire: Copper
• DC Resistance: 3.7 Ohm
• Magnet System: Neoduymium

Crossover

• Crossover Point:
• 2200Hz/12dB
• Crossover Controls: Tweeter+/- 2dB
• Wiring Options: N/A