Hifonics BG-2500.1D Monoblock 2500W RMS Class D Brutus Gamma BG Series Amplifier
- SKU #: 02796
-
General Features:
- Hifonics BG-2500.1D Monoblock Class D Amplifier
- CTA-2006B Compliant
- RMS Power Ratings:
- 4 Ohms: 625 Watts x 1
- 2 Ohms: 1250 Watts x 1
- 1 Ohms: 2500 Watts x 1
- Max Power Ratings:
- 4 Ohms: 1250 Watts x 1
- 2 Ohms: 2500 Watts x 1
- 1 Ohm: 5000 Watts x 1
- Variable Electronic Crossover: 12dB Per Octave
- Variable Low Pass Crossover 12dB per Octave/30Hz-250Hz
- Parametric EQ
- Bass Boost: 0-10dB
- Subsonic Filter: 15-35Hz
- Variable Voltage: .2 to 9V
- Frequency Response: 10Hz-500Hz
- Total Harmonic Distortion (THD): <.10%
- Speaker Level Inputs
- Power Terminal 12v/GND: 4 AWG
- Speaker Terminal Wire Gauge: 12 AWG
- Bass Remote Included
- Phase Adjustment: 0-180°
- Nickel Plated RCA's
- Low Noise Preamplifier Circuit
- Variable Electronic Crossover
- Electronic Equalizer
- Ultra-Fi™ MOSFET Technology
- LED System Protection Circuitry Diagnostics
- Aluminum Heat Sink
- Fuse Rating: External
- Dimensions: 14.75"L8.25"W2.375"H
- Weight: 11LB
Low Noise Preamplifier Circuit |
Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion. |
---|---|
RCA Inputs |
Nickel-plated RCA jacks create the most efficient High/Low Level audio connection and resist corrosion. |
Operation Mode |
Mono only |
Crossover Type |
Variable electronic crossovers allow for complete control of the sound. |
Electronic Equalizer |
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. |
Class / Topology |
Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs. |
Output Device Technology |
Pro-Fi™ Output Device Technology: The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion. |
Heat Sink |
Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices. |
Power Supply |
Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. |
Output Connections |
High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal. |
Connection Type |
Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile. |
LED System Protection Circuitry Diagnostics |
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel. |
Bass Remote Included |
Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. |
Phase Adjustment |
Phase 0-180°: Bass drum attack, snap requires phase between deep frequency subwoofers and upper midbass speakers. |
Additional Information
-
DD Audio Digital Designs E-C6.5B 6.5" 125W Component Kit
Special Price $99.00
Retail: $159.99
-
Audison - Thesis Th 3.0 II VOCE Midranges 3" 110W Active Speaker Pair
Special Price $1,999.99
Retail: $2,225.99
-
Special Price $1,899.99
Retail: $2,599.99
-
IDQ10 V.4 D4 - Image Dynamics 10" Dual 4-Ohm IDQ V.4 Series Subwoofer
Special Price $238.99
Retail: $265.99
-
Tempo Ultra Integra 502 - Morel 5.25" 100W RMS 2-Way Coaxial Speakers
Special Price $299.99
Retail: $338.99