Sundown Audio SLD-10 D4 10" 600W RMS Dual 4-Ohm SLD Series Subwoofer
- SKU #: 02883
Sundown Audio SLD-10 D4 10" 600W RMS Dual 4-Ohm SLD Shallow Series Subwoofer
The Sundown SLD series can be considered a “re-boot” of the SD-2 line from 2011. The SD-2 was essentially a “shallow SA v1” by design – meaning it shared the cone, surround, and spider with the SA but with a shorter motor with a shorter coil. The SD series went another route starting with the 3rd generation (SD-3) – tilting more towards SQ and sealed enclosures. Due to popular demand we have created the SLD series to add a heavily abuse tolerant “shallow” that likes ported boxes back into the line-up!
Much like the current SD-4 series we utilized solid pole-piece so the SLD can also be mounted directly against the rear enclosure wall to reduce net depth requirements. Compared to the old SD-2 we have introduced numerous important upgrades: pole-piece channels for reduced air noise & increased cooling, top-plate “slits” for better cooling and less distortion, and a magnet ID shorting ring. In terms of long-term reliability we have also bolted down the spider, bolted the motor together, bolted on the aluminum pole cap, and added “mini-XL” lead wires thus ensuring many years of flawless service.
The bottom line is if you need a relatively shallow woofer that will take a beating then the SLD is, hands-down, the woofer for you from our line. If you are looking for more SQ then look toward the SD-4 series.
Details
- RMS Power: 600-watts
- Innovative high-velocity vented frame ring
- High Temperature 4-Layer copper voice coil wire
- Black Aluminum 2.5” voice coil former for superior heat dissipation
- High Temperature copper voice coil wire
- Large aluminum faraday ring (Magnet ID)
- Spring Loaded Terminals
- Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
- Solid Pole with vent channels around the OD
- Optimized for small ported, sealed, & band-pass enclosures
- Mounting Depth: 4.9"
- Mounting Diameter: 9.25"
Specifications:
- RE (ohms): 6.85
- FS (Hz): 46.817
- Vas (L): 12.091
- Qes: 0.547
- Qms: 2.246
- Qts: 0.440
- Le (mH): 4.71
- BL (NA): 24.492
- Mms (Grams): 162.818
- Cms (uM/N): 70.979
- Sens (1w/1m): 85.4
Subwoofer Enclosure Requirement:
- Sealed: 0.5 ft^3
- Ported: 1.0-1.25 ft^3 @ 35hz
- Displacement: 0.15 ft^3
- Depth: 4.9"
- Outside Diameter: 10.5”
- Cut-Out: 9.25”
- Weight: 25LB
Additional Information
-
CDT Audio CRM-62KiS 6.7" 250W RMS 2-Way Component Speakers System
Special Price $745.99
Retail: $999.99
-
HD-6MSUB - CDT Audio 6.5" Cast Sub Driver (Single)
Special Price $119.99
Retail: $149.99
-
Morel MPS 4.400 4-Channel 400W RMS Class AB Amplifier
Special Price $399.00
Retail: $499.99
-
HD-690 COM.2 - CDT Audio 6" x 9" Component Speaker System
Special Price $449.99
Retail: $499.99
-
P152 - Rockford Fosgate 5.25" 2-Way Punch Series Full Range Coaxial Car Speakers
Special Price $99.99
Retail: $142.99