Audison APS10S4S 10" 800W Single 4-Ohm Sunwoofer For Sealed Box

APS 10 S4S Subwoofer Driver | 800 W Peak Power | 250 mm | 4 ohm

Prima compact subwoofer family expands with the introduction of the new 25 cm (10 in.) APS 10 S4S, optimized for enclosures with a reduced volume starting from 10 liters. The configuration of the single 4 ohm voice coil makes it ideal to be driven by the new AP F8.9 bit amplifier with built-in DSP that delivers an outstanding 260 W RMS with two channels bridged. Also interesting is the possibility to create custom enclosures with two APS 10 S4S driven by the AP 1D amplifier using the 540 W RMS delivered on the 2 ohm load resulting from the drivers connection in parallel.

Features

• Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility.
• Designed to deliver maximum performance in a sealed enclosure starting from 10 lt.
• Special-designed cone-dust cap-basket geometry guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to a minimum.
• Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to the rear wall of the enclosure.
• Massive motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
• Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Single voice coil design specifically developed to be combined with either AP F8.9 bit (2 CH bridged 260 W RMS) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.

Steel mesh grille and plastic gasket included. –

Technical Specs

• Size 250 mm
• Power Handling - Peak 800 W
• Power Handling - Continuous 400 W
• Impedance 4 Ohm
• Magnet Material HIGH DENSITY FLUX FERRITE
• Voice Coil Ø 60 mm
• Woofer Qes 0,75
• Cone Material WATER REPELLENT PRESSED PAPER
• Xmax 12.6 mm
• Xmech 18 mm