Morel Virtus Nano Integra 602 Carbon 6.5" 100W RMS 2-Way Component Speakers Sytem

Winner of the EISA 2018-2019 best product award for the slimmest system and the CTA 2018 Design and Engineering Award the Virtus Nano Integra 602 is an ultra-slim high-fidelity point source speaker (patent pending). It expands the Virtus Nano series and offers even greater installation options where space is limited.

The Virtus Nano Integra is a true tour-de-force of innovative engineering, enabling Hi-Fi sound reproduction from a speaker that is only 0.67" (17mm) deep.

It is the shallowest 6.5-inch point source ever created for car audio. The Virtus Nano Integra 602 system was engineered to perform exceedingly well in the inherently problematic acoustic chamber of a car and within the limited space and off-axis placement that is often forced upon the installer.

Its design leverages Morel’s craftsmanship and engineering technology employing some of Morel’s renowned traits along with some new ones. Its new Z.P.I (Zero Point Integra) patent pending, single magnet dual motor drive technology combines a phase aligned tweeter in the center of the woofer to offer a natural sound reproduction and better tonal balance throughout the audible frequency range.

The “Grand-dome” convex shaped cone made of highly damped sandwich hybrid carbon fiber and foam core provides wide-dispersion and excellent on and off-axis response qualities. The woofer’s External Voice Coil (EVC™) motor features a highly efficient neodymium magnetic system and 2.1-inch diameter voice coil to enable high power handling and linear movement for a superior resolution to other designs.
Additionally an all a new handcrafted 1.1" Acuflex™ soft dome tweeter was developed to deliver a smooth, natural sound signature for the entire system.

The Virtus Nano Integra’s acoustic qualities coupled with its shallow size makes it possible for installers to have an easier time retrofitting a component system in any car without compromising performance. This high-fidelity car audio, promise a memorable musical experience.

Technology:

• Paper Composite Cone / Carbon Cone (Nano)
• Hexatech™ Aluminum VC
• EVC™ structure
• Acuflex™ coated tweeter
• Double Ferrite Magnet Motor
• Shielded Magnet
• MXR direct Crossover
• C.A.R Filter™
• Octopus Grille
• Large 2” voice coil
• Ultra Shallow Architecture (Nano)
• Grand Dome Geometry (Nano)
• Neodymium magnet motor (Nano)
• PSF™ (Progressive Field Symmetry-Nano)
• Z.P.I. Technology (Nano Integra)

Integra Woofer N

• Nominal Impedance: 4-Ohms
• Power Handling:
• 100W RMS
• 300W Max
• Sensitivity (2.83V/1M): 87 dB
• Frequency Response: 73 Hz
• Voice Coil Diameter: 54mm (2.16")
• Voice Coil Height: 9.5mm (0.4")
• Voice Coil Type/Former: Aluminum
• Voice Coil Wire: Hexatech Aluminum
• DC Resistance: 3-Ohms
• Voice Coil Inductance at 1 kHz (MH): 0.17
• Magnet System: Neodymium Vented
• BL Product/BXL: 4.18
• Max Linear Ex/ Xmax: ±3mm (0.12")
• Electrical Q Factor QES: 0.97
• QTS: 0.73
• QMS: 3.4
• Moving Mass MMS - gr/ounce: 11.8
• Equivalent Can Air Load VAS - L (cu. ft.): 7.5
• Effective Piston Area SD sq. cm. (sq. inch): 116 cm2
• Cone Type: Carbon Cone
• Cone Material: Carbon + Foam Core
• Unit Diameter: 6.5mm (0.26")
• Mounting Depth: 17mm (0.7")
• Mounting Cutout: 137mm (5.48")
• Net Weight: 450 gr

Integra Tweeter N

• Nominal Impedance: 6-Ohm
• Power Handling:
• 130W RMS
• 350W Max
• Sensitivity (2.83V/1M): 88dB
• Frequency Response: 1600-25000 Hz
• FS Hz: 900
• Voice Coil Diameter: 28mm (1.125")
• Voice Coil Former: Aluminum
• Voice Coil Wire: Hexatech Aluminum
• DC Resistance: 5.2-Ohm
• Magnet System: Neodymium
• Dome Type: Acuflex Hand Coated Soft Dome
• Dome Material: Silk

MXR250i Carbon Crossover

• Crossover Point: 1800Hz/12dB/6dB
• Crossover Controls: Tweeter +/-2dB
• Wiring Options: N/A