pkg Focal 130A1 5.25" Component Speakers + SOLID2 2-Channel Amplifier
- SKU #: 92231
130A1:
- Access 1 Series 5-1/4" 2-way Component System
- Power Handling:
- Peak: 200 watts per set / 100 watts each side
- RMS: 100 watts per set / 50 watts each side
- 85mm Magnet
- Orientable, Aluminum Inverted Dome Tweeter
- Frequency response: 65Hz - 20KHz
- Sensitivity: 91dB
- Grills included
- 25mm Voice Coil
- Mounting Depth: 61.3mm
SOLID2 Black:
Focal makes sure that nothing stands in the way of your music, especially your amplifier. Each Focal Solid amp features low-noise inputs that let you connect to almost any receiver — even your factory stereo. Available in black or red, this clean-looking, unassuming amp features an aluminum chassis that disperses heat efficiently, so it runs cool even when you're pushing it hard.
The two-channel Solid 2 amp puts out 75 watts RMS per channel to a pair of speakers, or you can send up to 200 watts RMS to a subwoofer for some real bass impact. Adjustable high- and low-pass filters shape output so your speakers sound their best in your vehicle.
The amp's ultra-high frequency response brings out all the overtones that add realism to your music. Short-circuit, over-current, and thermal overload protection circuits ensure that this full-range amp will reproduce your music with breathtaking realism for years to come.
Solid Series Amplifiers: The Focal Solid 2 amplifier is part of the Solid series of amplifiers, which feature AB-class amplification for excellent sound quality. Their all-aluminum chassis efficiently dissipates heat to protect the amp from thermal overload. The compact size makes the amp easier to install in tight places. The front-mounted connections and top-mounted controls are easily accessible for a clean installation.
Top-mounted Controls: The amplifier has controls conveniently mounted on the top panel under a removable cover.
Front-mounted Terminals: The Solid 2 has all of the cable connections on the front of the amplifier for a clean installation.
Protection Circuitry: The Solid 2 amplifier employs the following protection circuits: short circuit, thermal overload, over voltage, polarity reversal.
- 2-channel car amplifier
- 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms)
- 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
- CEA-2006 compliant
- variable high- and low-pass filters (50-150 Hz, 12 dB/octave)
- Class-A/B amplifier design
- frequency response: 10-60,000 Hz
- preamp- and speaker-level inputs
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- fuse rating: 25A x 1
- Dimensions: 8-11/16"W x 2"H x 7-7/8"D
Additional Information
-
XDi 1100.1 - Arc Audio Monoblock 1100W RMS Class D Full Range Amplifier
Special Price $719.99
Retail: $829.99
-
Sundown Audio SFB-600D Class-D Monoblock Amplifier
Special Price $149.99
Retail: $223.99
-
Audison - AV K6 6.5 VOCE 6.5" 125W Component Set
Special Price $879.99
Retail: $995.99
-
SI4612 - Stinger 12 Ft. 6-Channel 4000 Series RCA Interconnect Cable
Special Price $30.99
Retail: $34.99
-
Memphis PRX57 5" x 7" / 6" x 8" 40W RMS 2-Way Coaxial Speakers
Special Price $99.99
Retail: $159.99