Customer Service: (323) 231-3525

Sundown Audio SD-3 10 D2 10" 500W RMS Dual 2-Ohm SD Series Subwoofer

  • SKU #: 00216

Special Price $249.99

Retail: $314.99

($65.00 savings)

Availability: Discontinued

Condition: Brand New
Shipping: Free Shipping
Sold As: Individually

Sundown Audio SD-3 10 D2 10" 500W RMS Dual 2-Ohm SD Series Subwoofer

Click to view larger image

Sundown Audio Store 

Sundown Audio SD-3 10 D2 10" 500W RMS Dual 2-Ohm SD Series Subwoofer

 

Sundown Audio SD-3 10 D2 10

 

The SD-3 series is Sundown's premier sealed box offering. They started off this design knowing that the majority of sealed box applications today face a depth restriction. Each SD-3 model was designed to have the lowest depth possible while still maintaining a large window of mechanical cushion (about 2” p-p maximum mechanical travel for all models). We do not consider the SD-3 an “ultra-shallow” but they are as shallow as possible and feature several techniques to reduce the effective depth required

As mentioned above; the SD-3 series effectively requires less depth than other woofers that are more physically shallow. First, they have a completely solid pole and thus require no room for air venting behind the motor. This allows the motor to be completely flush against the back wall of the enclosure. Secondly the entire SD-3 series features an inverted rubber surround – this reduces the space required in front of the woofer to about 1” total (we suggest 1.25-1.5” when possible for the best sound). So, despite not being an “ultra-shallow” woofer they have an effective total depth requirement of about 2” less than most traditional woofers of an equal depth.

The SD-3 series truly is a world-class sound quality woofer with low mounting depth, small box requirements, and a reasonable price. This line features an under-hung motor topology – this means that the voice coil is shorter than the top plate so the amount of winding in the gap doesn’t change at all over the center portion of stroke – in this case featuring a 1” thick top plate and 1/2” long 8-layer copper voice coil. This allows for 0.57" (14.5mm) linear excursion one-way while maintaining an extremely flat BL curve. The large inverted rubber surround & high-stroke spider also allow for a very even compliance curve over the full range allowed by the SD-3 series. To further reduce distortion a large Magnet ID faraday ring has also been included

Sundow borrowed some technology from their large high-excursion woofers and incorporated a hyper-extended pole-piece into the SD-3 line. This helps to prevent voice coil rocking & related damages at high levels of stroke – since the SD-3 has such a soft suspension and shallow depth it would be more prone to this without the hyper-extended pole. But, thanks to Sundown's extensive experience in building high-stroke subwoofers they were able to incorporate the ideal solution.

**NOTE: The parameter set for the SD-3 line has been optimized for very small sealed enclosures. They feature a very soft suspension, so they will not tolerate the high levels of abuse that ported enclosures can generate.

 



Sundown Audio 2 year warranty

Product Features:

  • Sundown Audio SD-3 10 D2 10" 500W RMS Dual 2-Ohm SD Series Subwoofer
  • Power Handling:
    • RMS Power = 500-watts
  • Voice Coil Configuration: Dual 2-Ohm
  • Xmax = 14.5mm one-way by 70% BL
  • Under-Hung low distortion motor topology
  • Solid pole piece with chamfered edges
  • Black Aluminum 2.5” voice coil former for superior heat dissipation
  • High Temperature 8-Layer copper voice coil wire
  • Large aluminum faraday ring (Magnet ID)
  • Spring Loaded Terminals
  • Stitched-On Tinsel Lead Wires
  • Optimized for small sealed enclosures
  • Inverted Rubber Surround to reduce front-mount depth
  • High strength cast aluminum frames
  • Cut-Out Diameter: 9 1/4"
  • Top Mount Depth: 4 5/8"
  • Xmax = 14.5mm one-way by 70% BL
  • Sealed Box Requirement .75 ft^3
DC Resistance (Re) Ω 3.72
Resonance Frequency (Fs) Hz 25.7
Equivalent Volume (Vas) L 35.5
Electrical Q Factor (Qes)   0.49
Mechanical Q Factor (Qms)   3.12
Total Q Factor (Qts)   0.42
Force Factor (BL) NA 14.28
Moving Mass (incl. Air Load) (Mms) g 165
Suspension Compliance (Cms) μm/N 230
Sensitivity 1w / 1m 82.9 dB
Sealed Enclosure Suggestion cu. ft. 0.5
Ported Enclosure Suggestion cu. ft. Not Recommended
Displacement cu. ft. 0.11
Depth in 4.48
Outside Diameter in 10.5
Cutout in 9.25
Recommended Tuning Hz 32
Recommended Port Area sq. in 16

Additional Information

In the words of our customers

Great Subwoofer!!
by Medic 83 on 4/7/2016
Just put one these in a sealed enclosure(.8 cubic ft) in a Fiat Abarth and it hits hard and clean!! I am running 525 watts from a Alpine PDX V9. You can't go wrong with Sundown.
You Recently Viewed