Rockford Fosgate HD14U-STAGE3 Audio Upgrade Kit for Select 2014+ Harley Davidson Road Glide Ultra Motorcycles
- SKU #: 02665
This 6-speaker, 400 watt high performance audio system is designed for select 2014+ Harley-Davidson® motorcycles (see compatibility chart.) The included 6.5” fairing speakers, 6.5” TourPak speakers, and 6x9” baglid speakers are frequency-response tuned to overcome wind, exhaust, and road noise up to 75 MPH. The 400-watt amplifier features 2-channels for the fairing speakers and 2 channels for the rear TourPak and baglid speakers. The amplifier installation kit includes an external heat-sink, mounting brackets, speaker and power wiring with all necessary hardware. The included T-harness integrates into the electrical system for front/rear fading capability (requires Rockford Fosgate flash) and features a loop-thru for an optional DSR1 digital signal processor (sold separately.) You will need to flash your factory radio to use this kit. Ready to flash? Here’s a list of dealers that can flash your radio.
Features:
- No drilling or cutting required
- Kits bolt to factory attachment points
- Direct connect wiring harnesses for Harley-Davidson® models
- T-harness integration supports front/rear fader control (requires "Rockford Fosgate 2014+ All Bikes" flash)
- Includes amp output Y-adaptors for lower fairing and/or TourPak speakers
- TM400X4ad Power Marine 400 Watt Class-ad 4-Channel Amplifier
- TMS65 Power 6.5" Full Range Fairing/Tour Pak Speaker 2014+ Harley-Davidson®
- TMS69BL14 Power 6x9” speaker retrofit kit for factory Harley-Davidson® baglids (not for fiberglass models)
- RFK-HD14 2014+ Harley-Davidson® Road Glide® & Street Glide® Amplifier Wiring Kit
TM400X4ad
- Element Ready Power Series Class-AD 4-Channel Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 4 chan.
- 2 ohms: 100 watts x 4 chan.
- Bridged 4 ohms: 200 watts x 2 chan.
- Includes Rockford Fosgate Performance Verification Certificate w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")
- CEA-2006 Compliant Amplifier
- 4/2 Ohm muti-impedance Constant Power
- Rockford Fosgate proprietary Class-AD technology
- Differential inputs with high level auto turn-on feature
- Remote-Out feature when using high level inputs
- Features C.L.E.A.N. Set-up with 10-step set-up procedure w/ input/output clip detection and indicator LEDs
- 4-layer 2oz. copper circuit board with 2-part epoxy coating
- Real time thermal sensing with Rollback technology
- Top mounted easy access controls
- 2/4 channel input switch
- 4 Ohm bridged capable
- Twin fan cooling system
- Dual extruded heat sinks
- Discrete surface mount technology
- Extruded aluminum with UV inhibitors
- Molex, marine grade nickel plated connectors
- Ferrite core coated/booted transformer
- TO-220 MOSFETs with MEHSA
- 3-stage thermal lock extrusion
- Efficiency (average): >75%
- Input sensitivity: 150mV - 12V
- Frequency Response: 20 - 20,000 Hz
- Total Harmonic Distortion (THD): <1.0%
- Variable bass boost (LP): 0 to +18 dB bass boost at 45 Hz
- Variable treble boost (HP): 0 to +14 dB bass boost at 12.5 Hz
- Selectable Crossover: LP / AP / HP
- Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
- Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
- Recommended Fuse Rating: 60A x 1 (not included)
- Dimensions: 4.25"W x 8.30"L x 1.60"H
- 16 gauge speaker output connections
- 8 gauge power and ground wiring is recommended for installation
- Installation Kit for Select Harley-Davidson Motorcycles available: Rockford Fosgate RFKHD9813
TMS65
- 6.5" Full-range Fairing/Tour-Pak Motorcycle Speakers
- Power Handling:
- Peak: 150 watts per pair / 75 watts each
- RMS: 75 watts per pair / 37.5 watts each
- Recommended Power Range: 10 - 37.5 watts RMS per channel
- Dust, UV, Temperature, Water, Corrosion and Vibration resistant design
- Carbon fiber reinforced polypropylene cone
- Santoprene Surround
- 25mm Film Dome Tweeter
- Low Profile Coaxial Tweeter Design
- Neodymium motor structure
- Co-Molded Cone and Surround
- Poly-cotton spider
- Integrated 6dB Crossover
- High Power Polyester Capacitor
- CEA-2031 compliant speakers
- High Power 1.4" Aluminum Voice‐Coil
- Spade Terminals for easy speaker connections
- 4 ohm impedance
- Frequency Response: 56 - 20,000 Hz
- Sensitivity: 91dB
- Speaker grilles included
What's Included:
- (2) Speakers
- (2) 2015+ Road Glide Grilles
- (2) 2014+ Street Glide Grilles
- (2) 2014+ Tour-Pak Grilles
- (1) Hardware Pack
Compatibility
- Harley-Davidson
- 2015 - Up Road Glide
- 2014 - Up Street Glide
TMS69BL14
- Compatible with 2014-up Harley-Davidson factory bag lids
- Designed for use with existing HD14-TKIT audio systems
- Direct connect wiring harness
- Includes all installation hardware, grilles, and accessories
Speakers:
- 6" x 9" full-range motorcycle speakers
- Designed for bag lid locations
- Element-Ready design is weather and water resistant
- Carbon-fiber reinforced polypropylene cone
- Glass-reinforced polymer frame
- 1" film dome tweeter with integrated phase plug and ASA grill
- Integrated 6 dB crossover with polyester capacitor
- Element-Ready design is weather and water resistant
- Santoprene VAST surround (creates more cone space for bigger sound)
- Handles up to 100 watts RMS (200 watts peak)
- Frequency response: 56-20,000 Hz
- Sensitivity: 89 dB
- Impedance: 4 ohms
RFK-HD14
The RFK-HD14 is an amplifier installation kit for the Power Marine TM400X4ad amplifier on Harley-Davidson® model years 2014 to current. All new design features t-harness integration for fading front/rear capable systems (requires Rockford Fosgate flash.) Integrates into factory electrical system without modifications or cutting.
This complete kit includes a heatsink, bracket, and wiring harnesses needed to install the Power Marine TM400X4ad amplifier on 2014 and newer model Harley-Davidson motorcycles. Kit also includes Y-adaptors for adding lowers or Tour-Pak speakers, Boom!™ Audio bypass plugs for factory amplified systems, a DSR1 loop-thru harness, and all necessary hardware.
Features:
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Plug and Play design for easy installation
- Designed for use with 2014-Current Harley-Davidson® Motorcycles
- Designed for use with Power Marine TM400X4ad model amplifier
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- T-harness integration supports front/rear fader control (requires "Rockford Fosgate 2014+ All Bikes" flash)
- Includes amp output Y-adaptors for lower fairing and/or TourPak speakers
- Includes Boom!™ Audio bypass plugs for factory amplified systems
- Includes loop-thru harness for optional DSR1 signal processor
- NOTE: Your factory radio will need to be flashed.
Specifications:
- Dual Amp Installation Kit: No
- Battery PWR/GND Gauge: 8 AWG
- Amplifier PWR/GND: 8 AWG
- Speaker Wire Gauge: 16 AWH
- Fuse Size: 60 Amp
- Fuse Type: MAXI
- Compatible with:
- 2015-Current Harley Davidson Road Glide CVO
- 2015-Current Harley Davidson Road Glide Ultra
- 2015-Current Harley Davidson Road Glide
- 2014-Current Harley Davidson Street Glide CVO
- 2014-Current Harley Davidson Electra Glide Ultra Classic
- 2014-Current Harley Davidson Street Glide
Additional Information
-
SPW14T - Stinger PRO 4 Gauge Premium Power Cable
Special Price $1.99
Retail: $2.49
-
Special Price $1,089.99
Retail: $1,359.99
-
Audision Connection SLI4.1 4-Channel Signal Interface
Special Price $89.99
Retail: $119.99
-
SPF52100 -Stinger 100 Amp ANL Waffle Fuse
Special Price $7.99
Retail: $19.99
-
Memphis PRXA300.4 4-Channel 300W RMS Power Reference Series Amplifier
Special Price $209.99
Retail: $469.95