pkg Sundown Audio SAE-600D Monoblock 600W RMS Digital Class D Amplifier + E-12 V.4 D2 12" 500W RMS Dual 2-Ohm E V.4 Series Subwoofer

SAE-600D

• Digital Class-D Linkable Monoblock Amplifier
• Power Output (Test Voltage 14.4 Volts):
• RMS Power 2-Ohms Linked: 1000W
• RMS Power 1-Ohm Mono: 600W
• RMS Power 2-Ohm Mono: 300W
• RMS Power 4-Ohm Mono: 150W
• MOSFET PWM Power Supply
• 1-Ohm Stable Load
• 24dB/Oct - Variable Low Pass Filter
• 24dB/Oct - Variable Subsonic Filter
• 12dB/Oct - Variable Bass Boost
• 180 Degree Variable Phase Shift
• 4-Way Protection Circuit (Thermal, Voltage Speaker Short and DC Offset)
• Wired Remote Control
• Low Pass Frequency Crossover: 30Hz - 250Hz
• Subsonic Filter: 10Hz - 50Hz
• Bass Boost - 45Hz: 0-12dB
• Phase Shift Control: 0-180 Degree
• Frequency Response: 10Hz - 250Hz
• Input Sensitivity: 6 - 0.2 Volts
• Signal Noise Ratio: >100dB
• THD 4-Ohms: <0.5%
• Efficiency 4-OIhms: 86%
• Recommended Fuse Rating: 25A x 2
• Dimensions: 9.1" L x 8.5" W x 2.3" H

E-12 V.4 D2

The fourth version of our acclaimed E series is all new for 2016. Since we introduced the first E series in 2012 we have sought to push the limits of entry-level woofers forward. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – all of these bars have been raised once again for our third generation E series.

The new stamped steel frame is also significantly stronger than previous generation E series woofers & features an enhanced “Sundown style” high pressure vented spider landing. Working in conjunction with a motor ventilation system based on our SA series & the new, larger voice coil the third generation E series possesses thermal capacity unheard of in this class of subwoofer.

Bottom-line; if you are looking for a great subwoofer option and do not want to break the bank the Sundown E-Series woofers are for you & these are the best E series made to date. They are ideal for anyone from beginners to seasoned professionals seeking industry leading performance at a value price point.

Features and Specifications:

• RMS Power = 500-watts
• Xmax = 14mm one-way by 70% BL
• Vented magnetic gap
• Vented pole piece with optimized geometry
• Black Aluminum 2.5” voice coil former for superior heat dissipation
• High Temperature 4-Layer copper voice coil wire
• Spring Loaded Terminals
• Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
• Box Recommendations:
• Sealed: 1.0 ft^3
• Ported: 1.75 ft^3
• Displacement: 0.12 ft^3
• Depth: 6 1/2"
• Outside Diameter: 12 1/4"
• Cut-Out: 11 1/8"
• Recommended Tuning: 32hz
• Recommended Port Area: 28 in^2