pkg Rockford Fosgate R2-1200X1 1200 Watt RMS Mono Amplifier + Pair of P3D4-12 12" Punch Stage 3 Subwoofers
- SKU #: 02973
Features & Specifications:
R2-1200X1
Prime 1200 Watt Mono Amplifier R2-1200X1
Primed for Performance, the R2-1200X1 is a 1200 watt, class-D amplifier, capable of operating at 4Ω, 2Ω or 1Ω mono. This amplifier is extremely efficient because of its class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
R2 Amplifier Product Overview
Rockford Fosgate's R2 amplifiers are the building blocks for great audio systems, powerful enough to even DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at an incredible value. Best of all, they are designed and engineered here in Tempe, Arizona.The R2 models are developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.
- Balanced Differential Inputs with RCA Pass Through Outputs
- High Level Input Capable
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Features C.L.E.A.N. Set-up
- Variable Input Gain adjustment level
- Includes RLC Remote Level Control
- Variable Infrasonic Filter
- Continuously Variable On Board Punch EQ
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Cast aluminum heat sink
- Class D Topology
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- 1 Year Warranty
Technical Specifications:
CEA-2006 Compliant
|
CEA-2006 Power Rating 400W x 1 @ 4Ω ≤1.0% THD+N |
Number of Channels | 1 |
Total Power (Sum of Rated Power) |
1200 Watts |
Rated Power (RMS Continuous Power) |
400 Watts x 1 @ 4Ω 800 Watts x 1 @ 2Ω 1200 Watts x 1 @ 1Ω |
Dynamic Power
(PVC/PowerCube®) |
489 Watts x 1 @ 4Ω
889 Watts x 1 @ 2Ω 1389 Watts x 1 @ 1Ω |
Bridgeable
|
NO
|
Frequency Response
|
20 Hz - 250 Hz
|
Input Sensitivity
|
Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V |
Circuit Topology Class
|
Class D
|
Total Harmonic Distortion (THD+Noise) |
4Ω: <1.0%
2Ω: <1.0% 1Ω: <1.0% |
Signal Input
|
Low-Level: 2 RCA High-Level: 4-Pin Molex |
Signal Output
|
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input) |
Tone Controls
|
0 to +18 dB @ 45 Hz |
Crossover Controls
|
Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth |
Remote Controls | Yes |
Visual Indicators
|
Power/Protect
C.L.E.A.N. In C.L.E.A.N. Out |
Power Wire Gauge
|
4 AWG
|
Power Input Connector
|
Compression Terminal Block
|
Speaker Wire Gauge
|
8 AWG
|
Speaker Output Connector
|
Compression Terminal Block
|
Operating Voltage
|
9 - 16 VDC
|
Recommended Fuse
(not included) |
121 A
|
Dimensions (H x W x D) |
1.9" x 6.8" x 11.3"
(4.9 cm x 17.3 cm x 28.5 cm) |
P3D4-12
- 12" Punch P3 Series Dual 4 Ohm Subwoofer
- Power Handling:
- Peak: 1200 watts
- RMS: 600 watts
- Impedance: 4 ohm
- Anodized aluminum heat sinking cone & dustcap for strength and durability
- Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
- Dual tear & fatigue resistant linear poly cotton spiders
- Optimized motor magnetics with extended pole and bumped backplate
- Fatigue resistant and reduced strain stitched tinsel leads
- Multi point high temp/strength neck joint bonding technique
- Sturdy 16 gauge compound bend frame geometry
- Semi-Flexible PVC removable protective motor cover
- Custom insulated compression input terminal assembly
- Proprietary spider venting/cooling technique
- Decorative die cast trim ring
- Custom 10-AWG nickel plated push terminals
- High temperature 4-layer 2-1/2" voice coil with spun laced nomex insulating reinforcement collar
- 102 oz Double stacked ferrite magnet structure
- Frequency response: 27.7-250 Hz
- Sensitivity: 85 dB
- Xmax: 16.2 mm
- Mounting Depth: 6-11/16"
- Cutout Diameter: 11-1/4"
Additional Information
-
Memphis 15-M615D2 15" 900W RMS Dual 2-Ohm Subwoofer
Special Price $299.99
Retail: $539.95
-
DSK 165.3 - Hertz 6.5" 2-Way 80W RMS DIECI Series Component Speakers System
Special Price $199.99
Retail: $260.99
-
RUX-KNOB - Alpine Bass Boost Remote for New PDX Amplifiers
Special Price $59.99
Retail: $79.99
-
DD Audio Digital Designs SL610-D2 10" Dual 2-Ohm Slim Shallow-Mount 1200W Subwoofer
Special Price $259.99
Retail: $299.99
-
IDQ10 V.4 D4 - Image Dynamics 10" Dual 4-Ohm IDQ V.4 Series Subwoofer
Special Price $238.99
Retail: $265.99