ADMW 9 - Morel 9" Add-on Mid-woofer Kit

The ADMW SW subwoofers were offer a perfect combination of power handling, deep bass and ease of installation for those who need musical but yet dynamic bass in their cars.

The ADMW SW employ Morel's Hybrid magnet motor system, manufactured exclusively by morel, which combines two types of magnets, neodymium and ferrite, to create a motor of tremendous power, while retaining its compact size. By using a large 3" diameter Hexatech aluminum voice coil to support a large area of the DPC shallow cone, the profile of the woofer remains low and cone breakup distortion at high level is prevented.

The ADMW SW is rear vented making use of Morel's advance C.A.R (Controlled Acoustic Resistance) filter that improved the acoustical by controlling the cone movement, thus, making it ideal for free-air installations.

• Overall Dimensions 222mm (8.75")
• Mounting Depth 71mm (2.80")
• Mounting Cutout 192mm (7.56")
• Nominal Power Handling 200 W
• Transient Power 10ms 1000 W
• Nominal Impedance 4 Ohm
• Sensitivity 1W / 1M 88 dB
• Frequency Response 25-3000Hz
• Resonance Frequency 44Hz
  
  Voice Coil
• Voice Coil Diameter 75mm (3")
• Voice Coil Height 14.5mm(0.57")
• Voice Coil Former Aluminum
• Voice Coil Wire Hexatech Aluminum
• DC Resistance 3.8 Ohm
• Voice Coil Inductance @1kHz 0.52 MH
  
  Magnet System
• Magnet System Type Double magnet rear vented
• HE-Magnetic Gap Height 6mm (025")
• B-Flux Density 0.65 T
• BL Product/BXL 3.5
• Max. Linear Excursion/Xmax 11mm (±5.5mm)
  
  Operational Parameters
• Suspension Compliance CMS 1150
• Mechanical Q Factor QMS 1.92
• Electrical Q Factor QES 1.21
• Total Q Factor Q/T 0.74
• Mechanical Resistance RMS 2.54kgS¹
• Moving Mass MMS 17.67gr
• Equivalent Car Air Load VAS 43.40L (1.55ft³)
• Cone / Dome Type One-piece formed
• Cone / Dome Material DPC
• Effective Pison Area SD 219cm² (33.95in²)
• Net Weight 1.20kg (2.60lb)