Customer Service: (323) 231-3525

CL-E532- CDT Audio 5.25" 3-Way Classic Series Component Speakers System

  • SKU #: 92499

Special Price $299.99

Retail: $399.99

($100.00 savings)

Availability: In Stock

Condition: Brand New
Shipping: Free Shipping
Sold As: Individually

* Required Fields

Special Price $299.99

Retail: $399.99

CL-E532- CDT Audio 5.25" 3-Way Classic Series Component Speakers System

Click to view larger image
CL-5E
Midbass drivers, featuring our compound curvature, carbon treated cones for "Contoured Dispersion." Stainless steel top and bottom plate for heat dissipation. Gold plated terminals. Real butyl rubber surrounds and flat spiders for linear cone excursion.
CDT designs and builds its drivers and crossovers to the very highest of standards. Years of experience and design flexibility yield higher quality and better performance. Quite simply, we produce "audiophile" sound, smoother response, wider dynamic range, and better imaging and sound staging. Our incredible midbass and midrange drivers are flat to 6 kHz! That's 6 octaves response! This puts much less stress on the tweeter, providing better power handling and much better sound. Our special "Contoured Dispersion" radiation pattern in the critical midrange frequencies delivers rock solid imaging and front staging, with virtually no side biasing. These carbon treated cones are smooth and natural sounding thanks to an ideal combination of stiffness and damping. The compound curvature shape prevents cone flex and break-up. This provides clean midbass, even at higher levels. The critical midrange frequencies are clear and precise with no distortion from "ringing." The mids use a real butyl rubber surround, not merely a mixed butyl compound.
  • Midrange: 5.25"
  • Power handling: 60 watt
  • Impedance: 4 Ohm
  • Mounting depth: 2.5"
  • Mounting diameter: 4.63"

HD-3
  • 1 pr 3” mid-woofer
  • Frequency response 115Hz-11.000Hz
  • Power handling: 100watt (150Watt Pk) HPF-250Hz
  • Impedance 4 Ohm Sensitivity: 84.9dB
  • Mounting depth: 2.063”
  • Cut out diameter: 3.63”
  • Cast frame: OD 4.03”
  • Cone: Reinforced carbon paper cone
  • Magnet weight 7.2 Oz
  • Cone surround Buytal rubber
  • Impedance: 4Ohm
  • Voice coil: 1.0” (26mm)
  • Fs: 115Hz

TW-25
  • 1” silk dome tweeter driver neo charged magnet structure
  • Cooled by ferro fluid
  • Frequency response 1500Hz-20.000Hz
  • Impedance 4 Ohm
  • Sensitivity: 92.5dB
  • Surface and flush mount mounts
  • Flush mount hole 1 ¾”
  • Flush mount depth ¾”
  • Flush cup OD 2 ¼”.

EX-30
Finally, we have created a compact economical solution to installation of a front-mounted 3- way system for the general market.

This crossover module offers interactive crossover to and adjustability of the mid-range and tweeter and a high-tech elliptic filter to crossover the tweeter. New and unprecedented functionality in this unit is highlighted by the superiority of the midrange level setting.

Designed to produce a crossover to the midrange around 250 Hz with a seven-inch woofer and four-inch midrange in a typical installation, this crossover produces amazing results with ease in a minimal occupied space.

The proprietary series connected tapped inductor maintains damping to the midrange and woofer on all levels and interacts to vary the crossover Q. As the midrange level is reduced, the crossover Q to both drivers is parametrically altered to automatically produce an optimal crossover to both drivers at all selected levels.

The midrange is allowed to crossover to the tweeter based on its natural character. This minimalist approach will produce the best sound in most installations. Choose the mounting position and select the drivers to accommodate your vehicle and to facilitate a natural sound. A very small, extended range speaker can also be selected to augment the tweeter response especially if a high mounting position is chosen for the tweeter. Tweeter crossover is accomplished with a fast fifth-order elliptic that brings in the tweeter quickly and invisibly to complement a broad variety tweeters and midrange drivers in most locations. Crossover will typically be achieved around 5 kHz depending on driver selection and relative mounting position. Extended-range midrange speakers can raise the crossover to produce a blend up to 10 kHz typically.

Three-way configurations will create an installation that gives the smoothest midrange, the most flexibility in mounting the drivers for a smooth blend and finally gives the best bass impact. Midrange drivers, because they are small and require minimal enclosure volume, can usually be located conveniently close to the tweeter.

Installation of this unit is totally straightforward and trouble-free. EX-30DT Terminals are clearly marked with the designated connections and polarity. Level setting switches are clearly marked and each offers 3 positions. Start with all the level settings to high. All tone controls are set to flat. With a vocal recording try reducing the midrange level for a natural sound. Next with a recording that includes cymbals set the tweeter level for a natural top-end.

Additional Information

You Recently Viewed
  1. DC Audio XL M4 ELITE 12 D2 12" Dual 2-Ohm 2200W RMS Subwoofer

    DC Audio XL M4 ELITE 12 D2 12" Dual 2-Ohm 2200W RMS Subwoofer

    Special Price $834.99

    Retail: $1,099.99

  2. DC Audio 10.0K Monoblock 1-Ohm Class D 10,000W RMS Competition Car Amplifier

    DC Audio 10.0K Monoblock 1-Ohm Class D 10,000W RMS Competition Car Amplifier

    Special Price $2,639.99

    Retail: $2,889.99

  3. DD Audio Digital Designs 715d-D2 15" Dual 2-Ohm 3600W Subwoofer

    DD Audio Digital Designs 715d-D2 15" Dual 2-Ohm 3600W Subwoofer

    Special Price $399.00

    Retail: $569.99

  4. PN1.1000D - Soundstream Monoblock 1000W RMS Class D Power Amplifier

    PN1.1000D - Soundstream Monoblock 1000W RMS Class D Power Amplifier

    Special Price $167.99

    Retail: $289.99

  5. Audison - SR1.500 Mono Amplifier with Crossover

    Audison - SR1.500 Mono Amplifier with Crossover

    Special Price $289.99

    Retail: $550.99