AV DUE - Audison 2-Channel 900W RMS VOCE Series Power Amplifier

AV due is a powerful stereo amplifier. The power supply section and final stage, designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS). AMP constantly checks the operating status system and ARTTM function allows automatic turn-on/off when a remote signal isn’t available from the source.

You can use VCRA volume remote control by connecting it to the special SUB VOL socket when you drive the subwoofer in mono. There are endless handling possibilities, for every type of installation. AV due also allows you to replace the analog input board with the digital one (AV bit IN).

POWER SUPPLY

• Power supply voltage: 11 ÷ 15 VDC
• Idling current: 1.7 A
• Idling current when off: 0.02 mA
• Consumption @ 14.4 VDC (Max Musical Power): 65 A

AMPLIFIER STAGE

• Distortion - THD (1kHz @ 4Ω): 0.04 %
• Bandwidth (-3 dB): 4 ÷ 60k Hz
• S/N ratio (A weighted @ 1V): 100 dBA
• Damping factor (1k Hz @ 4Ω): 120
• Input sensitivity: 0.3 ÷ 5 V RMS
• Input impedance: 15k Ω
• Speaker-In sensitivity: 1.4 ÷ 24 V RMS
• Speaker-In impedance: 5k Ω
• Minimum load impedance: 2Ω
• NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:
• 210 W x 2
• OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%:
• 2 Ch: 260 W x 2 (4Ω)
• 2 Ch: 450 W x 2 (2Ω)
• 1 Ch: 900 W x 1 (4Ω)

SIGNALS INPUTS / FILTERS

• Inputs: Pre IN / Speakers IN
• Outputs: Pre OUT Full Range
• Filters (Full / Hi-Pass / Lo-Pass):
• 50 ÷ 5k Hz (2 range) @ 12 dB/Oct.
• Filter (Lo-Pass 24 dB mono):
• 50 ÷ 500 Hz @ 24 dB/Oct.

OTHER FUNCTIONS

• Remote IN: 7 ÷ 15 VDC - 1mA
• Remote OUT: 12 VDC - 50mA
• Fuse (Strip type): 60 A
• Remote SUB volume adj. (with Lo-Pass 24 dB):
• (-50 ÷ 6) dB
• Speakers IN Turn-on (ART): Selectable

DIMENSIONS

• Max size (mm/inches): 220 x 470 x 58 / 8,66” x 18,50” x 2,28”

Manual