P400X2 - Rockford Fosgate 400W 2-Channel Punch Series Amplifier

The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection

Number of Channels: 2
Rated Power(RMS Continuous Power):     
    125 Watts x 2 @ 4-Ohm
    200 Watts x 2 @ 2-Ohm
    400 Watts x 1 @ 4-Ohm Bridged
Total Power(Sum of Rated Power): 400 Watts RMS
Bridgeable: Yes
Crossover Controls: High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Tone Controls:
    Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
    Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
    Function depends upon LP/AP/HP switch position
Signal Input: Hi/Low level: 1 RCA pair
Signal Output:     Low level: 1 RCA pair
Power Input Connector:     Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators:
    Power/Protect/Thermal LED
    Input Clip LED
    Output Clip LED
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in) [6.05 x 19.71 x 28.02 (cm)]