P400X4 - Rockford Fosgate 400W 4-Channel Punch Series Amplifier

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection

Number of Channels: 4
Rated Power(RMS Continuous Power):
   50 Watts x 4 @ 4-Ohm
   100 Watts x 4 @ 2-Ohm
   200 Watts x 2 @ 4-Ohm Bridged
Total Power(Sum of Rated Power): 400 Watts RMS
Bridgeable: Yes
Crossover Controls: Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Tone Controls:
   Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
   Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
   Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
   Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
   Function depends upon LP/AP/HP switch position
Signal Input:     Hi/Low level: 2 RCA pair
Power Input Connector:     Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators:
   Power/Protect/Thermal LED
   Input Clip LED
   Output Clip LED
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in) [6.05 x 19.71 x 28.02 (cm)]