Elate 602 Ti - Morel 6.5" 2-Way Component System

• Nominal Impedance: 4 Ohms
• Power Handling: 180Wrms
• Max. Trans.Pwr Handling: 1000Wrms
• Sensitivity (2.83V/1M): 88dB
• Frequency Response: 30-4000Hz
• Resonant Freq. Fs Hz: 43
• Voice Coil Diameter: 75mm
• Voice Coil Height: 0.57in (14.50mm)
• Voice Coil Type/ Former: Aluminum
• Voice Coil Wire: Hexatech Aluminum
• DC Resistance: 3.6 Ohms
• Voice Coil Induct. @1 kHz: 0.41MH
• Magnet System: Double Magnet Rear Vented
• HE-Magnetic Gap Height: 0.20in (5mm)
• B-Flux Density (T.M.): 0.66
• BL Product/BXL: 5.37
• Max. Linear Ex./Xmax: ±0.2in (±4.75mm)
• Suspension Compliance CMS - mm/N: 0.81
• Electrical Q Factor QES: 0.57
• QTS: 0.44
• QMS: 1.87
• Mech.Resistance RMS - Ohm/meter: 2.41
• Moving Mass MMS - gr: 16.9
• Equiv. Can Air Load VAS: 16.02L (0.56cu.ft)
• Effective Piston Area SD: 119sq.cm (18.45sq. inch)
• Cone Type: One-Piece Formed
• Cone Material: DPC
• Unit Diameter: 6.5in (165mm)
• Mounting Depth: 2.4in (61mm)
• Mounting Cutout: 5.55in (141mm)
• Net Weight: 2.6lb (1.18Kg)

Tweeters

• Nominal Impedance: 4 Ohms
• Power Handling: 100WRms
• Max Transient Power Handling W (10ms): 300
• Sensitivity (2.83V/1M): 91dB
• Frequency Response: 450-6000Hz
• FS: 390Hz
• Voice Coil Diameter: 2.125in (54mm)
• Voice Coil Former: Aluminum    
• Voice Coil Wire: Hexatech Aluminum
• DC Resistance: 3.5 Ohm
• Magnet System: Neoduymium Rear Vented
• Dome Type: Acuflex Hand Coated Soft Dome
• Dome Material: Silk
• Unit Diameter:3.5in 88mm)
• Mounting Depth: 0.83 (21mm)
• Mounting Cutout: 2.97in (75.5mm)
• Net Weight: 0.55lb (0.25Kg)

Crossover

• Crossover Point:
• W: 300Hz/18dB
• T: 2200Hz/ 12dB
• Crossover Controls: Tweeter +/- 2dB
• Wiring Options: Bi wire/ Bi amp