MLK-3PA - Hertz 6.5" 3-Way Component Speakers System

ML-1600
The ML 1600 is a woofer with extraordinary features. The pressed-pulp V-Cone® is combined with cotton fibres, while the surround features a smooth profile, adding to its naturalness and timbre accuracy. The spider exploits the excellent mechanical properties of Nomex®, the mobile voice coil is wound on extra light CCAW (Copper Clad Aluminium Wire) wound on a Kapton® former; the REN® Neodymium motor assembly generates a high-density magnetic flux, to achieve excellent dynamics, contrast and efficiency. Its versatility allows the ML 1600 to offer its highest potential in two-way systems as easily as it reproduces, without compromise, the mid-bass frequency in multi-way systems.

• 6.5" Neodymium REN Woofer with V-Cone
• Power Handling: 250 W Peak, 125 W Continuous
• Impedance: 4-Ohm
• Frequency Response: 40 - 7k Hz
• Sensitivity: 93 dB/SPL

ML-700
ML 700 is a new cone midrange introduced to the Mille line; reproducing an extremely wide range of frequencies with absolutely remarkable acoustic emission. The ML 700 unique materials used in this remarkable driver are plain to: the pressed-pulp cone combined with cotton fibres, the Natural Butyl Rubber surround, the spider constructed from Nomex®, the CCAW (Copper Clad Aluminium Wire) voice coil wound on a Kapton® former. Additionally, the use of the advanced Klippel Scanning Vibrometer measurement instrument provided fine-tuning of the motor assembly to obtain a mid-frequency range with linearity and accuracy. The self-supporting basket and butyl rubber cover make the ML 700 a perfect and unique component both for two-way and three-way configurations.

• 2-3/4" Neodymium REN Midrange with V-Cone
• Power Handling: 100 W Hi-Pass Filtered 250 Hz @ 12 dB Oct.
• Impedance: 4-Ohm
• Frequency Response: 200 - 14k Hz
• Sensitivity: 92 dB/SPL

ML-280
Dynamics, naturalness, high acoustic emission; the ML 280 is the answer for those who long for reproduction of the high frequency range without compromise. Extremely high output is combined with Hi-End sound quality. The ML 280 tweeter offers hi-tech solutions; optimized through the most innovative technologies, a refined selection of materials as well as a very high-quality production process. The Tetolon® Fiber dome features a hemispheric-hyperbolic profile, while the double REN® Neodymium motor assembly generates extraordinary magnetic flux density within the air gap. An advanced venting system, based on vent holes on the back plate, ensures dissipation of the heat generated inside the extra light CCAW (Copper Clad Aluminium Wire) voice coil, wound on a Kapton ® former.

• 1-1/8" Neodymium REN Tweeter with Tetolon Dome and damping Chamber
• Power Handling: 180 W Hi-Pass Filtered 1.8 kHz @ 12 dB Oct
• Impedance: 4-Ohm
• Frequency Response: 1.3k - 25k Hz
• Sensitivity: 95 dB / SPL

MLCX-2-TM
The MLCX 2 TM is the passive crossover dedicated to filter Mille midrange and tweeter components in an Active/Passive multi-amplified three-way system. Being the best choice to enhance the natural qualities of the Mille components, the MLCX 2 TM also features a three position level control for the tweeter, providing the ability to fine-tune the transducer’s emission and achieve perfect acoustical results in any type of configuration.

• 2-Way Mid-High Passive Crossover Network
• Specific Components: Crossover 18/18 dB Oct
• Power Handling: 300 W Peak, 150 W Continuous
• Crossover: Lo/Hi-Pass; 4 kHz @ 18/18 dB Oct.
• Component Adjustment: Tw +2; 0; -2dB
• Dimensions: 150 x 282 x 43.5mm