Mosconi Zero 4 4-Channel 1350W 4-Way Hi-End Class AB Amplifier

• 4 Channel AB class, Full MOSFET Amplifier
• Power Rating: 2 CH x 100 Watt & 2 CH x 210 Watt @ 4 Ohm < 1% THD+N 
• 1 Ohm stable
• Very low THD and IMD
• Regulated power supply
• High/Low level selector (HL / LL)
• Auto REMOTE function
• Cross Over with separate High Pass and Low Pass filter, Band Pass allowed
• Slot for G_cards (G_HOC, G_HP, G_LP, G_FSA)
• Remote Volume Control RTC_MOS (optional)
• Side panels in soft touch finishing with red LED lighting
• Available in Silver-Satin Finish
• Sn Ratio: >80 dBA [CH1/2] >76 dBA [CH3/4] (ref: 1 Watt into 4 Ohm)

Specifications:

• Power Handling (CH1/2 + CH3/4):
• 2 x 100 + 2 x 210 Watt per channel @ 4 Ohm
• 2 x 145 + 2 x 325 Watt per channel @ 2 Ohm
• 1 x 290 + 1 x 650 Watt @ 4 Ohm BTL Mode*
• 1 x 245 Watt @ 4 Ohm + 1 x 900 Watt @ 2 Ohm (BTL Mode*)
• Input sensitivity (Power rating ref): 0.39 V ÷ 8.6 V (LL) / 1.1 ÷ 25 V (HL)
• Xover functions (BAND Pass allowed):
• CH1/2 FILTER1: 20 ÷ 175 Hz (HP or LP x1/ x10 )
• CH1/2 FILTER2: 50 ÷ 300 Hz (HP or LP x1/x20 )
• CH3/4 FILTER: HP (20 ÷ 175 Hz ) & LP (50 ÷ 300 Hz)
• FILTER1 + FILTER2 ( CH1/2) Band Pass Allowed
• FILTER (CH3/4) Band Pass Allowed
• 12 dB/oct – 0.7 (Stereo & Mono)
• Dimensions: 450 x 250 x 50 mm

Downloads:

• Download Datasheet
• Download Manual

*VERY IMPORTANT NOTE – READ CAREFULLY
4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load 2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load 1 Ohm ST or 2 Ohm BTL – MUSICAL SIGNAL – speaker load only