DC Audio 2.0K Monoblock 2000W RMS Linkable Digital Amplifier
- SKU #: 02304
DC Audio 2.0K Monoblock 2000W RMS Linkable Digital Amplifier
DC Audio amplifiers are engineered and manufactured to ensure the years of uncompromised musical, high performance and reliability. DC Audio amplifier are high power audio amplifiers, so very loud music can cause hearing loss and intended for using in vehicles with 12 volt, negative ground electrical systems. Attempting to connect or operate the amplifiers in another type of electrical system may cause damage to the amplifier or electrical system.
FEATURES sub-feature
Write features here.
Feature: Sub-feature
Write feature here.
Product Features:
- 6.5" component speaker system (includes 2 woofers, 2 tweeters, and hardware)
- Power Handling:
- 6-60 watts RMS power range (120 watts peak)
- Polyglass woofer with butyl rubber surround
- Non-resonant ABS/fiberglass basket
- 1" Aluminum/magnesium inverted dome tweeter
- Flush and pod mount for tweeter mounting
- Built-in crossovers
- Innovative basket fixing
- Removable clips supplied
- Neodymium magnet: powerful compact: 2.65" (67.4mm with rubber cap) & 1.75" (45 mm without cap)
- Frequency response: 80-28,000 Hz
- Sensitivity: 92.7 dB
- Impedance: 4 ohms
- Woofer Top Mount Depth with Magnet Boot: 2-3/16"
- Woofer Top Mount Depth without Magnet Boot: 2-1/16"
- Tweeter Top Mount Depth w/ flush mount: 3/4"
- Rated Power Output
- RMS output power at 4-Ohm: 600W
- RMS output power at 2-Ohm: 1200W
- RMS output power at 1-Ohm: 2000W
- RMS output power 16V at 1-ohm: 2500W
- RMS output power 18V at 1-Ohm: N/A
- High quality hand-wound power supply transformers
- High purity 2oz - 3oz printed circuit boards
- Stable into 1-Ohm mono load or 2-Ohm linkable
- Variable low pass and subsonic filter
- Variable bass boost
- Wired remote control included
- 4 ways protection circuits (thermal, voltage, speaker short and DC)
- Input Sensitivity: 6V - 0.2V
- Low Pass Filter: Switchable
- @ 24 dB Slope (Variable): 35Hz - 250Hz
- Subsonic Filter: Switchable
- @ 24 dB Slope (Variable): 10Hz - 50Hz
- Variable Bass Boost: 0 dB - 9 dB
- Variable Phase: 0 - 180 degrees
- Frequency Response: 15Hz - 270Hz
- Signal-to-Noise Ratio: 100
- Damping Factor: 150<
- Efficiency at 4-ohm: Over 90%
- THD at 4-Ohm: Less than 0.1%
- Recommended Fuse Rating: 200A
- Linkable Connect Fuse Rating: 400A
- Dimensions: 15.75" L
- Heatsink Length: 17.72 in (450 mm)
- Heatsink Width: 9.38 in (238 mm)
- Heatsink Height: 2.35 in (59.6 mm)
- Weight: 17LB
2 Ohms14.4 V1,200W x 11 Ohm14.4 V2,000W x 11 Ohm16 V2,500W x 11 Ohm18 VN/AProtection YesClip YesPowerGauge0Ga
Output Power (RMS) | 4 Ohms | 14.4 V | 600W x 1 |
---|---|---|---|
Input Sensitivity | 6V - 0.2V | ||
Variable Low Pass Filter | @ 24dB Slope | Hz | 35-250 |
Variable Subsonic Filter | @ 24dB Slope | Hz | 10-50 |
Bass Boost | Variable | dB | 0-9 |
Variable Phase | 0-180 degree | ||
Voice Coil Inductance (Le) | mH | 0.993 | |
Frequency Response | Hz | 15-270 | |
Signal to Noise Ratio | dB | 100< | |
Damping Factor | 150< | ||
Efficiency @ 4 Ohm | % | Over 90 | |
THD @ 4 Ohms | % | Less than 0.1 | |
Recommended Fuse Rating | Amps | 200 | |
Linked Fuse Rating | Amps | 400 | |
Indicator | Power | Yes | |
Speaker & Power Terminal | Mold Type | Yes | |
Heatsink Length | 17.72 in | 450 mm | |
Heatsink Width | 9.38 in | 238 mm | |
Heatsink Height | 2.35 in | 59.6 mm |
Downloads:
Additional Information
-
Hertz MPK165.3 6.5" Mille Pro 4 Ohm 2-Way Component Speakers
Special Price $599.99
Retail: $675.99
-
13100 - Dynamat Dyna Tape 30 Foot Roll of 1.5ft - Wide Aluminum Finishing Tape
Special Price $12.99
Retail: $14.99
-
DD Audio Digital Designs TXOHP18 High Pass Tweeter Crossovers
Special Price $28.99
Retail: $39.99
-
HD-690CF.2 - CDT Audio 6" x 9" 125W RMS 2-Ohm Carbon Fiber Subwoofer
Special Price $199.99
Retail: $299.99
-
Sundown Audio Z-15 V.6 D2 15" ZV6 Series Dual 2-ohm Car Subwoofer Zv6-15 D2
Special Price $999.99
Retail: $1,199.99