Hertz HCP5MD Marine 5 Channel 1500W Amplifier

HCP5MD - Hertz Marine 5 Channel 750W RMS Class D Amplifier

HCP 5MD  marine amplifier features a compact design ready to face the open water environment, providing tons of clean power. The heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier.

Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensures extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies.

More specifically HCP 5MD is suitable for a five channels system with subwoofer, a tree channel front + sub system using the front and rear built-in filters that also include a bass boost circuit and a subsonic filter.

	Data table Channel mode 5 - 3 Output Power (RMS) @ 14.4 VDC 5 Ch: 65 W x 4 + 200 W x 1 (4 Ω) 5 Ch: 105 W x 4 + 330 W x 1 (2 Ω) 3 Ch: 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω) 3 Ch: 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω) Filters Bypass Hi-Pass Lo-Pass Band-Pass Subsonic Front CH; Rear CH FRONT/REAR Ch: 50 ÷ 5k Hz @ 12 dB/Oct. SUB Ch: 50 ÷ 500 Hz @ 24 dB/Oct. REAR Ch: 50 ÷ 500 Hz (Hi) @ 12 dB/Oct. - 50 ÷ 5 kHz (Lo) @ 12 dB/Oct. on/off: 25 Hz @ 24 dB/Oct. Distortion - THD (100Hz @ 4Ω) 0.02 % S/N Ratio (A weighted @ 1V) 100 dB Damping factor (100Hz @ 4Ω) 100 Size W x D x H mm (in.) 345 x 190 x 50 / 13.58 x 7.48 x 1.97
	Technologies D-CLASS OUTPUT STAGE Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable output stage. CORROSION PROTECTION Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated Marine-grade (epoxy coated) PCB boards. SALT FOG PROOF To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure complete resistance to corrosion, typical of this atmospheric agent. WATER JET TESTED The protection grade IP64 defines all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.