Ultimo Titanium 10 - Morel Ultimo TI 104 10" 4 Ohm 1000 Watt Subwoofer
- SKU #: 03478
Features:
Powerful. Dynamic. Musical. Three simple words which perfectly describe the Ultimo Titanium. The Ultimo Titanium was engineered to reproduce bass so musically accurate that it would have no equal.
Ultimo Titanium subwoofers are equipped with Morel’s most advanced technology derived from its Hi-Fi bass drivers. At their core lies the EVC motor design with an extremely large 5.1” (130mm) Hexatech™ aluminum voice coil attached to a titanium voice coil former – the first of its kind in car audio. The massive magnet creates unparalleled efficiency - nearly 90% as opposed to 60% on comparable systems - while the giant voice coil moves the speaker cone with unmatched precision. Exceptionally stiff and lightweight, the titanium improves driver dynamics for even quicker transient response. An additional copper magnet cap stabilizes the magnetic field while increasing the linear response and reducing distortion.
The subwoofer is topped off with a beautiful two-layer woven carbon fiber and paper composite cone. Extremely stiff and highly damped, it moves air with precision and authority, without experiencing breakup or distortion.
The culmination of Morel’s technological advancements resulted in the Ultimo Titanium. It’s simply the most dynamic car audio subwoofer Morel has engineered, providing the highest resolution in bass reproduction. It’s powerful. It’s dynamic. And it’s a musical delight.
Specifications:
General Data | Ultimo Titanium 10 | |
Nominal Impedance | 4 Ohm | |
Overall Dimensions | DxH | 263mm (10.35") x 140.3 mm (5.52") |
Power Handling RMS | P | 1000W |
Transient Power 10ms | 3000W | |
Sensitivity 2.83Vrms/1M | 85dB | |
Sensitivity 1W/1M | 84.5dB | |
Frequency Response | 10-900 Hz | |
Cone Material | Carbon-fiber laminated paper | |
Net Weight | 6.5 Kg (14.3 lb) | |
Driver displacement | 2.34 Lit (0.08 cu.ft) | |
Voice Coil and Magnet Parameters -with 5 inch copper sleeve | ||
Voice Coil Diameter | 130mm (5.1") | |
Voice Coil Height | 37mm (1.45") | |
Voice Coil Former | Titanium | |
Voice coil wire | Hexatech Aluminum | |
Number of layers | 2 | |
Max. Linear excursion | X | ±12.5 mm (0.5")(Each way) |
Magnet system type | Double magnet vented | |
HE-Magentic gap height | HE | 12mm (0.5") |
B flux density | BXL | 0.64 T |
BL product | BXL | 13.0 T·M |
Electric Data | ||
Nominal Impedance | Z | 4.0 Ohm |
DC Resistance | RE | 3.7 Ohm |
Voice Coil Inductance@ 1KHz | LBM | 0.44mH |
T-S Parameters | ||
Suspension Compliance | CMS | 0.46 mm/N |
Mechanical Q Factor | QMS | 4.37 |
Electrical Q Factor | QES | 0.41 |
Total Q Factor | QTS | 0.37 |
Mechanical Resistance | RMS | 3.37 N·S/M |
Moving Mass | MMS | 127 g |
Resonant Frequency | FS | 24 Hz |
Eq. Cas Air Load (liters) | VAS | 85 Lit (3.02 cu.ft) |
Effective Piston Area | SD | 0.0363 m2 |
Additional Information
-
Sundown Audio SA-12 D4 CLASSIC 12" 750W Dual 4-Ohm SA Series Subwoofer
Special Price $269.99
Retail: $323.99
-
MOFO-124X - Power Acoustik 12" Dual 4-Ohm 2700W MOFO Series Subwoofer
Special Price $179.99
Retail: $249.99
-
SGP90300 - Stinger 300 Amp Circuit Breaker
Special Price $39.99
Retail: $64.99
-
Alpine R-A90S 6-Channel 75W RMS x 4 + 150 x 2 R-Series Amplifier
Special Price $599.95
Retail: $649.99
-
Zapco ADSP-Z16 IV-12A 16-Channel DSP 12-CH. X 120W Amplifier
Special Price $1,499.99
Retail: $1,799.99