Customer Service: (323) 231-3525

Sundown Audio SLD-10 D4 10" 600W RMS Dual 4-Ohm SLD Series Subwoofer

  • SKU #: 02883

Special Price $239.99

Retail: $287.99

($48.00 savings)

Availability: In Stock

Condition: Brand New
Shipping: Free Shipping
Sold As: Individually

Special Price $239.99

Retail: $287.99

Sundown Audio SLD-10 D4 10" 600W RMS Dual 4-Ohm SLD Series Subwoofer

Click to view larger image

Sundown Audio Store

Sundown Audio SLD-10 D4 10" 600W RMS Dual 4-Ohm SLD Shallow Series Subwoofer

The Sundown SLD series can be considered a “re-boot” of the SD-2 line from 2011. The SD-2 was essentially a “shallow SA v1” by design – meaning it shared the cone, surround, and spider with the SA but with a shorter motor with a shorter coil. The SD series went another route starting with the 3rd generation (SD-3) – tilting more towards SQ and sealed enclosures. Due to popular demand we have created the SLD series to add a heavily abuse tolerant “shallow” that likes ported boxes back into the line-up!
Much like the current SD-4 series we utilized solid pole-piece so the SLD can also be mounted directly against the rear enclosure wall to reduce net depth requirements. Compared to the old SD-2 we have introduced numerous important upgrades: pole-piece channels for reduced air noise & increased cooling, top-plate “slits” for better cooling and less distortion, and a magnet ID shorting ring. In terms of long-term reliability we have also bolted down the spider, bolted the motor together, bolted on the aluminum pole cap, and added “mini-XL” lead wires thus ensuring many years of flawless service.

The bottom line is if you need a relatively shallow woofer that will take a beating then the SLD is, hands-down, the woofer for you from our line. If you are looking for more SQ then look toward the SD-4 series.

Details

  • RMS Power: 600-watts
  • Innovative high-velocity vented frame ring
  • High Temperature 4-Layer copper voice coil wire
  • Black Aluminum 2.5” voice coil former for superior heat dissipation
  • High Temperature copper voice coil wire
  • Large aluminum faraday ring (Magnet ID)
  • Spring Loaded Terminals
  • Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
  • Solid Pole with vent channels around the OD
  • Optimized for small ported, sealed, & band-pass enclosures
  • Mounting Depth: 4.9"
  • Mounting Diameter: 9.25"

Specifications:

  • RE (ohms): 6.85
  • FS (Hz): 46.817
  • Vas (L): 12.091
  • Qes: 0.547
  • Qms: 2.246
  • Qts: 0.440
  • Le (mH): 4.71
  • BL (NA): 24.492
  • Mms (Grams): 162.818
  • Cms (uM/N): 70.979
  • Sens (1w/1m): 85.4

Subwoofer Enclosure Requirement:

  • Sealed: 0.5 ft^3
  • Ported: 1.0-1.25 ft^3 @ 35hz
  • Displacement: 0.15 ft^3
  • Depth: 4.9"
  • Outside Diameter: 10.5”
  • Cut-Out: 9.25”
  • Weight: 25LB

 

Additional Information

You Recently Viewed