Customer Service: (323) 231-3525

DC Audio DC-M3 LV2 10 D4 10" 600W RMS Dual 4-Ohm Subwoofer

  • SKU #: 02319

Special Price $239.99

Retail: $319.99

($80.00 savings)

Availability: Back-Order

Condition: Brand New
Shipping: Free Shipping
Sold As: Individually

DC Audio DC-M3 LV2 10 D4 10" 600W RMS Dual 4-Ohm Subwoofer

Click to view larger image

With more power handling than before, the Level 2 is back and better than ever!

This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.

It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.

This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.

Key Features:

  • Extremely rigid non-pressed paper cone assembly
  • Multilayered polymer wide roll foam surround
  • Polypropylene dust cover with DC logo
  • Dual 8" OD flat linear roll spiders
  • Heavy duty interweaved tinsel lead wire sewn to the spider
  • Cast aluminum black frame
  • FEA analyzed and optimized motor assembly - Fully CNC machined
  • Rubber mounting gasket
  • Chrome spring loaded push terminals
  • 2.5” Hi-temp copper voice coil wound on black anodized voice coil former
  • Rubber magnet cover
  • VC Diameter: 2.5"
  • Magnet weight: 15 lbs.

T/S Parameters:

  • Nominal Impedance (Znom): Dual 4 ohm
  • Effective Piston Area (Sd): 324 cm²
  • Equivalent Compliance (Vas): 13.89 liters
  • Mechanical Compliance (Cms): 0.095 mm/N
  • Mechanical Mass (Mms): 210 g
  • Resonance Frequency (Fs): 35.6 Hz
  • Force Factor (BL): 24 NA
  • DC Resistance (Re): 7.2 ohms
  • Voice Coil Inductance (Le): 7 mH
  • Mechanical Q Value (Qms): 8.96
  • Electrical Q Value (Qes): 0.592
  • Total Speaker Q Value (Qts): 0.555
  • One-Way, Linear Excursion (Xmax): 22 mm
  • Efficiency (Ref SPL @ 1W): 82.1 dB (82.6 dB @ 2.83V)

Box Enclosure Specifications:

  • Mounting depth: 5.5"
  • Mounting hole diameter: 9.35"
  • Outside driver diameter: 11"
  • Suggested Sealed Enclosure: 0.5 ft³
  • Suggested Ported Enclose: 1 ft³
  • Displacement: 0.12 ft³

Voice Coil Diameter in 2.5
Power Handling RMS 600W
Peak 1200W
Magnet Weight lbs 15
DC Resistance (Re) Ω 7.2
Resonance Frequency (Fs) Hz 35.6
Equivalent Volume (Vas) L 13.89
Mechanical Q Factor (Qms)   8.96
Electrical Q Factor (Qes)   0.592
Total Q Factor (Qts)   0.555
One-way, Linear Excursion (Xmax) mm 22
Voice Coil Inductance (Le) mH 7
Force Factor (BL) NA 24
Moving Mass (incl. Air Load) (Mms) g 210
Suspension Compliance (Cms) mm/N 0.095
Ref SPL @ 1 Watt dB 82.1 (82.6 dB @ 2.83 V)
Sealed Enclosure Suggestion cu. ft. 0.5
Ported Enclosure Suggestion cu. ft. 1.0
Displacement cu. ft. 0.12
Mounting Depth in 5.5
Mounting Hole Diameter in 9.35
Outside Driver Diameter in 11

Additional Information

You Recently Viewed