Customer Service: (323) 231-3525

Hybrid 63 - Morel 6.5" 3-Way Component Speaker System

  • SKU #: 03354

Special Price $1,429.99

Retail: $1,499.99

($70.00 savings)

Availability: In Stock

Condition: Brand New
Shipping: Free Shipping
Sold As: Complete Sets

Special Price $1,429.99

Retail: $1,499.99

Hybrid 63 - Morel 6.5" 3-Way Component Speaker System

Click to view larger image

Includes:

  • 3-way component speaker system
  • includes two tweeters, two midrange drivers, two woofers, two crossovers
  • 6-1/2" one-piece Damped Polymer Cone (DPC)
  • 2.1" shallow silk dome midrange speaker
  • 1.1" Acuflex coated silk dome tweeter
  • external crossover with two tweeter level settings
  • handles up to 140 watts RMS (600 watts peak power)
  • frequency response: 35-25,000 Hz
  • sensitivity: 91 dB at 2.83 V
  • midrange mounting depth: 7/8"
  • tweeter mounting depth: 1/2"
  • woofer mounting depth: 2-7/16"
  • woofer cutout diameter: 5-9/16"
  • grilles included
  • warranty: 1 year

What's in the box:

  • Two MW6mkII Woofers
  • Two CDM700 Midrange
  • Two MT300 Tweeters (with attached 7" length of speaker wire)
  • 2 MXR300.4 Crossovers
  • 2 Woofer grilles (installed)
  • 2 Midrange grilles (installed)
  • 2 Tweeter grilles (installed)
  • 2 Flush mount tweeter housings (with tweeters installed)
  • 2 Flush mount brackets
  • 2 Angled surface mount tweeter housings
  • 2 Rubber bases for the surface mount housings
  • 8 Midrange mounting clips
  • Twelve 3/4" Screws
  • Four 1" Screws
  • Eight 1-1/4" Screws
  • 8 Large speed clips
  • 6 Small speed clips
  • Grille putty
  • Eight 0.25" Crimp-on female quick slides
  • Two 0.187" Crimp-on female quick slides
  • Two 0.110" Crimp-on female quick slides
  • Two 0.187" Quick slide insulating covers
  • Two 0.110" Quick slide insulating covers
  • Installation guide
  • Warranty card
  • Genuine product verification instructions
 

SPECIFICATIONS:

Hybrid MW6 MKII
 
 TS Parameters HYBRID MW6 MKII
  Nominal Impendance (ohm) 4 4
  Power Handling Wrms 140
  Max. Trans. Pwr Handling Wrms 600
  Sensitivity (2.83 V/1M) dB 91
  Frequency response Hz 35 - 3000
  Resonant Freq. Fs Hz 45
  Voice Coil Diameter mm (inch) 54 (2.1)
  Voice Coil Height mm (inch) 11 (0.47)
  Voice Coil Type/Former Aluminium
  Voice Coil Wire Hexatech™ Aluminium
  DC Resistance (ohm) 3
  Voice Coil Induct. @1 kHz (mH) 0.22
  Magnet System Hybrid rear vented
  HE-Magnetic Gap Height mm (inch) 4 (0.16)
  B-Flux Density (T) 0.83
  BL Product/BXL 4.2
  Max. Linear Ex./Xmax mm (inch) 7 ± 3.5mm (0.28 ± 0.14)
  Suspension Compliance CMS - mm/N 1.1
  Electrical Q Factor QES 0.56
  QTS 0.44
  QMS 2.08
  Mech. Resistance RMS- N . S / M 1.5
  Moving Mass MMS - gr/ounce 11
  Equiv. Can Air Load VAS - L (cu.ft3) 21 (0.74)
  Effective Piston Area SD sq.cm (sq.inch) 119 (18.45)
  Cone Type One-piece formed
  Cone Material DPC
  Unit Diameter mm(inch) 165 (6.50)
  Mounting Depth mm (inch) 61 (2.40)
  Mounting Cutout 141 (5.55)
  Net Wight Kg (lb) 0.60 (1.32)
 
 
CDM700 Midrange Speakers

 TS ParametersCDM700
  Nominal Impendance (ohm) 8
  Power Handling Wrms 100
  Max. Trans. Pwr Handling Wrms (10ms) 300
  Sensitivity (2.83 V/1M) dB 90
  Frequency Response Hz 600-6000
  FS Hz 480
  Voice Coil Diameter mm (inch) 54 (2.125)
  Voice Coil Former Aluminium
  Voice Coil Wire Hexatech™ aluminium
  DC Resistance ohm 3.5
  Magnet System Neodymium Rear Vented
  Dome Type Selected Soft Dome
  Dome Material Silk
  Unit Diameter mm (inch) 88.00 (3.50)
  Mounting Dept mm (inch) 21.00 (0.83)
  Mounting Cutout mm (inch) 75.50 (2.97)
  Net Weight Kg (lb) 0.25 (0.55)
 
 
MT300 Tweeters
 
 TS PARAMETERS MT300
  Nominal Impendance (ohm) 6
  Power Handling Wrms 130
  Max. Trans. Pwr Handling Wrms (10ms) 350
  Sensitivity (2.83 V/1M) dB 93
  Frequency Response Hz 1600-25000
  FS Hz 1000
  Voice Coil Diameter mm (inch) 28 (1.125)
  Voice Coil Former Aluminium
  Voice Coil Wire Hexatech™ aluminium
  DC Resistance ohm 5.2
  Magnet System Double Magnet Neodymium
  Dome Type Acuflex™ hand coated soft dome
  Dome Material Silk
  Unit Diameter mm (inch) 43.00 (1.69)
  Mounting Dept mm (inch) 13.20 (0.52)
  Mounting Cutout mm (inch) 47.00 (2.00)
  Net Weight Kg (lb 0.067 (0.134)

 

MXR240.4 Crossovers

TS Parameters MXR240.4
  Crossover Point W: 2200Hz/18dB
  T: 2200Hz/12dB
   
  Crossover Controls Tweeter +/- 3dB
  Wiring Options N/A


Additional Information

You Recently Viewed