pkg Alpine MRV-M1200 Monoblock 1200W RMS Class D Amplifier + Pair of R-W12D2 12" 750W RMS Dual 2-Ohm R-Series Subwoofer

• Amplifier Type: Class-D (Digital)
• Channel Design: 1 Channel (Mono)
• Power Supply Design: DC-DC PWM Power Supply
• Power Supply: MOSFET
• Pre-Amp Stage: Discrete
• Final Outputs: Power MOSFET
• Crossover: Variable Lowpass Filter
• Gain Control: Continuously Adjustable Gain Control
• Bass EQ: Bass EQ Function
• Remote Turn On: Remote Sensing Function (for Speaker Level Input)
• Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
• Board Circuitry: S.T.A.R. Circuit
• RCA Output: Non-Fading Pre-Amp Output (4 Volts)
• Speaker-Level Inputs: 4-channel Speaker Level Inputs
• Power Indicator: Top Mounted Blue LED Power Indicator
• Thermal Control: Multi-stage Power Limits
• Power Requirements: 14.4 V.DC (11-16V allowable)
• Input Sensitivity (RCA Input): 0.15 - 4.0 V
• Input Sensitivity (Speaker Level Input): 0.4 - 10 V
• Input Impedance: >10k ohms
• Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
• Damping Factor (10W into 4 Ohms at 100Hz): >750
• Signal to Noise (1W into 4 Ohms): >85 dB
• Signal to Noise (Rated Power into 4 Ohms): >105 dB
• Preamp Output: 4.0V Max.
• Remote Level: -20 to 0 dB
• RMS Power Ratings
• Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
• Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)
• Max Power Output Ratings
• Total Max Power: 2400 W
• Dimensions:

• Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in
• Heat Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in

• 12" subwoofer with dual 2-ohm voice coils
• Kevlar reinforced pulp cone with HAMR Santoprene rubber surround
• Frequency response: 24-200 Hz
• Power handling: 750 watts RMS (375 watts per coil)
• Peak power: 2250 watts
• Top-mount depth: 6-3/8"