P900.4 - Crunch 4 Ch. 900 Watt PowerZone Series Amplifier

Features:

• PowerZone Series 4-Channel AB Car Amplifier
• RMS Power Rating:
  • 4 ohms: 57.5 watts x 4 chan.
  • 2 ohms: 112.5 watts x 4 chan.
  • Bridged, 4 ohms: 225 watts x 2 chan.
• Dynamic (Peak) Power Rating:
  • 4 ohms: 115 watts x 4 chan.
  • 2 ohms: 225 watts x 4 chan.
  • Bridged, 4 ohms: 450 watts x 2 chan.
• MOSFET power supply
• LED power and protection indicators
• Tuned Bass EQ (0-12 dB bass boost at 45 Hz)
• Speaker-level inputs with soft turn-on
• DC, short, thermal, overload protection
• Illuminated CRUNCH logo
• Variable high-pass filter (60-1200 Hz, 24 dB/octave)
• Variable low-pass filter (30-250 Hz, 24 dB/octave)
• Variable input level control: 0.2V-5.0V
• Frequency response: 30-1,200 Hz
• Dimensions: 11.81"L x 10"W x 2.16"H
• 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.

Specification:

Amplifier Class    AB
Number of Channels    4
RMS Power (4 ohms)    57.5 watts x 4 channels
RMS Power (2 ohms)    112.5 watts x 4 channels
RMS Power (1 ohm)    N/A
Bridged RMS Power    225 watts x 2 channels
Total RMS Power Output    450 watts
Peak Power Output    450 watts x 2 channels
Total Peak Power Output    900 watts
Minimum Impedance Unbridged    4 ohms
Minimum Impedance Bridged    2 ohms
THD at Rated RMS Power    0.05%
Speaker Level Inputs    Yes
Preamp Outputs    No
Built-in Crossover:   

• Low-pass (LP)
• High-pass (HP)
• Full (AP)

High-Pass Crossover Frequency    60 - 1200 Hz
Low-Pass Crossover Frequency    30 - 250 Hz
Subsonic Filter    N/A
Signal-to-Noise Ratio    90 dB
Channel Separation    80 dB
Bass Boost    0 - 12 dB
Bass/Gain Remote    No
Fan Cooled    No
Fuse Rating    20A x 2




P900.4 - Crunch 4 Ch. 900 Watt PowerZone Series Amplifier