- Rated Power 12.5 V: 120 W RMS x 1 @ 4 ohm
- 200 W RMS x 1 @ 2 ohm
- Rated Power 14.5 V: 175 W RMS x 1 @ 4 ohm
- 275 W RMS x 1 @ 2 ohm
- THD at Rated Power: 12.5V: <0.08% THD, 20 Hz - 20 kHz
- 14.4V: <1% THD, 20 Hz - 20 kHz
- S/N Ratio: >104 dB referred to rated power (A-weighted, 20 Hz – 20
- kHz noise bandwidth)
- Frequency Response: 10 Hz – 25 kHz (+0, -1dB)
- Damping Factor: >200 @ 4 ohm / 50 Hz >100 @ 2 ohm / 50 Hz
- Slew Rate: ± 22V / µs
- Input Range: 200mV – 8V RMS
- Dimensions (L x W x H): 9.80 in. x 9.25 in. x 2.50 in.
- 250 mm x 235 mm x 63.5 mm
- Description: Class A/B Monoblock Full-Range Amplifier
- Patented Technology: Absolute Symmetry™ Class A/B Circuit (U.S. Patent
#6,294,959)
- Differential-Balanced Input Topology: For superior noise immunity, RCA
jack inputs
- On-board Crossover: State-variable, 12dB / octave Butterworth with continuously
variable cutoff frequency selection from 50 – 200 Hz. Configurable as
Low-Pass or High-Pass
- Preamp Output: Pass-through type
- Bass EQ: +6 dB fixed frequency, fixed 'Q' (defeatable) with port for optional
remote bass control (RBC-1)
- Dual mono speaker output connections: Accept up to 8 AWG wire
- +12V and Ground connections: Accept up to 4 AWG wire
A-1200 - JL Audio 1 Ch 120 W RMS x 1 @ 4 ohm Full-Range Amplifier
