- RMS Power Output (Watts x Channels) 60 x 5
- Frequency Response 20-20k Hz
- THD at Rated RMS Power 1%
- Signal to Noise Ratio 80 dB
- Input Voltage 14.4v
- Peak Power Output (Watts x Channels) N/A
- Power at 2 Ohms (Watts x Channels) 0 x 0
- Bridged Power (Watts x Channels) N/A
- Minimum Impedance Bridged N/A
- Minimum Impedance Unbridged 2
- 5-channel Digital Theater amplifier
-
60 watts RMS x 5 at 4 ohms
-
Dolby Digital, DTS, and Dolby Pro Logic II processing built-in
-
two optical digital inputs
-
MOSFET power supply
-
CEA-2006 compliant
-
Ai-NET capable with compatible Alpine receivers
-
Bass Engine® features:
• variable center-channel crossover (20-800 Hz in 1/3 octave steps,
12/18/24 dB per octave)
• variable front, and rear high- and low-pass crossovers (20-400 Hz
in 1/3 octave steps, 6/12/18/24 dB per octave)
• variable subsonic filter (20-50 Hz in 1/6 octave steps)
• subwoofer phase control (0/180 degrees)
• time correction adjustment (0-10 mSec.)
• 17-band parametric EQ (five bands for front, rear, and center, two
bands for sub channel)
-
sub channel preamp output (20-200 Hz low-pass filter, 6, 12, 18, or
24 dB/octave)
-
STAR Topology (minimizes internal noise and prevents ground interference)
-
detachable front cover
-
blue power LED
-
fuse rating: 20A x 2
-
8-gauge power and ground leads recommended — wiring and hardware
not included with amplifier
-
13-11/16"W x 2-9/16"H x 10-5/8"D
MRAD550 - Alpine 5 Ch 60 Watts RMS x 5 Digital Theater Amplifier MRA D550
