The M6 (cast alloy red frame) has a more massive voice coil than typical bass/midrange and leans toward the bass in the sound compared to the standard high-end mid drivers. The upper midrange is somewhat mellower than standard high-end mids which creates a very very smooth and balanced non-fatiguing sound with an extension in the bass region never heard of before from a 6.5
mid driver. M6 is designed to handle about double the power compared to any industry standard high-end 6.5
mid-woofer. 150 Watt RMS 300 Watt Peak.
- Excellent separate mid bass driver
- Excellent separate sub bass driver
- Excellent 6.5 component set w/exended bass response at double power handling
- Excellent use in a Braxial tweeter on a bracket configuration
- Mounting Depth: 2.94"
- Diameter: 6.5" (170mm)
- Sensitivity: 88.1dB
- Power Handling: 150w RMS (300w Peak)
- Prequency Response: 10-4000Hz
- Nominal Impedance: 4 Ohms
- Voice Coil Diameter: 1.37" (35mm)
- Peak Xmax: 10mm
- Magnet Weight: 30oz
- Free Air Resonance: 52Hz
- Voice Coil DC Resistance: 3.8 Ohms
- Mechanical Q (QMS): 2.46
- Electrical Q (QES): 0.516
- Total Q (QTS): 0.426
- Compliance Volume (VAS): 15.05; 0.53 ft3
- Moving Mass, Diaphragm: 20.0Gr
- Motor Force Factor: 5.68 Tm
M6i - CDT Audio 6.5" 300 Watt Mid-Bass/sub-bass driver M 6 i M-6i
