SATNET-560 crossover is a cut above all
the above models. In this model the high pass crossover is replaced with a
fourth order transient-optimized design. This delivers the cleanest possible
Tweeter drive. Crossover takes place at a slightly lower 3.7kHz.The first order
woofer crossover has a larger zobel capacitor for a lower crossover frequency to
match. More than this a tapped inductor adds adjustability to this woofer
crossover also. This suits different driver sizes generally. The adjustor is
labeled by driver size (5.25 and 6.5). The image Tweeter is operated 3 db below
the main Tweeter at a fixed attenuation. Protection is omitted for maximum sound
quality. Terminals are 12 gauge block terminal, more robust military grade and
arranged in a dual four arrangement versus a single line as in the prior
models.
Tweeter Specifications:
- Diameter: 26mm
- Sensitivity: 92 dB
- Power Handling: 10 WRMS (100W Pk)
- Frequency Response: 1,500 ~ 20,000 Hz
- Nominal Impedance: 4 Ohms
- Voice Coil Diameter: 1.0" (25mm)
- Peak Xmax: N/A
- Magnet Weight: Neodymium
- Surround N/A
- Frame Molded
DXT-26 - CDT Audio 560 Transient Optimized Xover and DRT-26 Modular Tweeter
