HEX-5000 - CDT Audio Hybrid System Coordinator

Engineering a perfect compliment to the highly acclaimed CDT drivers was an equally challenging task. "The Elliptic" crossovers, called SatNet, are an engineering breakthrough for car audio.

They use an ingeniously designed fifth order, elliptic type network that creates very distinct advantages over conventional "Butterworth" or "Linkwitz-Riley" passive filter topologies. This topology is so unique that this is the VERY FIRST TIME it has been used commercially in a car audio application.

Technically speaking, the SatNet crossover design is a fourth order/24dB per octave design supplemented by a series first order/6dB per octave on the front end. The unique combination of the two creates a virtual 10th order, 60dB per octave crossover where the critical crossover point between the mid and tweeter is.
The benefits of the design are many. First, the power transition between midrange and tweeter is virtually identical. Phase response problems and polarity shifts are almost entirely eliminated. What you HEAR, is a much more natural sounding component system, as if it were that one perfect speaker. And further engineering improvement are our "Transient optimized"
designs which you find in the 560-200Z,200US and HEX-5000.

All combined, you have the ideal link to some of the best car audio loudspeakers you'll ever listen to.

The versatile master of all situations is achieved in one module with the highest quality parts. This is a large module. Any of the functions above are available. Many program modes are toggle switch selected. The mid-woofer is instantly reversible in phase by toggle switch. This module will work in two-way, three-way and/or upstage mode in any combination. Additionally to any of the prior modules three main tweeter levels are selectable. There are 5 settings for mid-woofer upper taper which shapes the mid woofer sound as well as the level adjustment for the upstage tweeter. Crossovers are 400 or 500 Hz for the mid-woofer in 3-way mode. The upstage crossover is approximately 8kHz and the main tweeter crosses over at 3.7 kHz. The L and C jumpers cross over the main tweeter and mid-woofer as a set to the upstage tweeter. The taper and attenuation settings operate to moderate the contribution of the mid-woofer to the midrange. All the functions of the best modules are available. Defeat able upstage tweeter protection is available.

• CDT Audio HEX5000 "Transient Optimized" HEX 5000 System Coordinator E.Q. Xover.
  
• 2-way mode flipping a switch.
  
• 3-way mode flipping a switch.
  
• Built in UpStage design
  
• Built in Midrange E.Q. Tuning

CDT Audio HEX5000 CDT Audio HEX 5000 Hybrid System Coordinator