The Helix B4 is a powerful, dynamic top-of-the-class amplifier that is controlled
by its own integrated software. This integrated managing software (IMS) makes
the read-out of all relevant data possible. Therefore the amplifier provides optimized
working in terms of power, current and temperature. The music signal is of course
analog processed to reach the best sound and dynamic results. The sophisticated
active crossover allows a perfect adjustment of all connected speakers and subwoofers.
The B4 has an integrated temperature controlled cooling fan that can be switched
off if desired. The turn-on temperature as well as the maximum power of the
cooling fan can be adjusted by two separate controls. The connection of an external
fan is possible.
- Cont. power rating RMS / Musik at 4 x 4Ohm RMS at 12 Volt:
4 x 46 Watt
- Cont. power rating 4 x 4 Ohm RMS/Musik at 13,8 Volt: 4 x
60/100 Watt
- Cont. power rating 4 x 2 Ohm RMS/Musik at 13,8 Volt: 1 x
90/150 Watt
- Cont. power rating 2 x 4 Ohm RMS/Musik bridged: 2 x 180/300
Watt
- Adjust Highpass/Lowpass/Bandpass: 30 Hz - 4kHz
- Total harmonic distortion (TDH): < 0,014%
- Signal to noise ratio: > 96 dB
- Damping factor: > 450
- Frequency range: 20 Hz -20 kHz
- TIM Distortion: < 0,02%
- Input sensitivity: 500 mV - 8 V
- Fuse: 2 x 20 A
- Input impedance: 10 kOhm
- Dimensions (H/W/D) in mm: 35 x 240 x 300
- Weight net: 4,7 kg
- Driver with class A technology
- Outputstage with 16 MosFet transistors
- RMI (realmixed input) for forming an optimised mono-summation
signal from the left and right channels
- NFI (noisefree input) for distortion-free listening L
- Intelligent active crossover
- Mono/Bridged/ Stereo switch
- 8.0 volt input for connection to any signal source
- ADC - Anti Distortion Choke to eliminate distortions
- Intelligent power supply
- Separate speaker protection circuit with current limitation
for speaker short-circuiting, cable contact with car chassis, low impedance
and wrong connection
- CPS - Color Protection System
- SMD - Surface Mounting Devices for constant assembling quality
- Double-sided, copper plated pc-board for best power and signal
transmission and protection against vibrations
- 24-karat gold-plated solid connectors
- Temperature-optimised heatsink for highest efficiency
- 1% accurate components for perfect audiophile sound quality
and maximum power
- Smoked-grey plexi cover with both side printing
