Rated Power (stereo): 45W RMS x 2 @ 4 ohm (12.5V); 75W RMS x 2 @ 2 ohm (12.5V)
Rated Power (bridged): 90W RMS x 1 @ 8 ohm (12.5V); 150W RMS x 1 @ 4 ohm (12.5V)
THD at Rated Power: <0.08% @ 4 ohm (20 Hz - 20 kHz)
S/N Ratio: >104 dB referred to rated power (A-weighted, 20 Hz
20 kHz noise bandwidth)
Frequency Response: 10 Hz 25 kHz (+0, -1dB)
Damping Factor: >200 @ 4 ohm per ch. / 50 Hz, >100 @ 2 ohm per ch. / 50 Hz
Slew Rate: 22V/s
Input Range: 200mV, 8V RMS
Dimensions: 9.8" x 9.25" x 2.36"
Absolute Symmetry: Class AB Circuit (U.S. Patent #6,294,959)
Differential, Noise-Cancelling Input Topology: RCA jack inputs (low-level) and multi-pin jack (high-level)
On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50/200 Hz. Configurable as Low-Pass or High-Pass
Preamp Output: Pass-through type.
Speaker output connections: accept up to 8 AWG wire +12V
Ground connections: accept up to 4 AWG wire
e2150 - JL Audio 2 Ch 150 Watt Amplifier e 2150 e-2150
