CS112RG-W3V3 - JL Audio Single 12" 12W3v3-4 Subwoofers Loaded in a PowerWedge W3v3 Sealed Enclosure with Grille Included
- SKU #: 78393
W3v3 & W1v2 Sealed PowerWedge Systems
JL?Audio PowerWedge systems have defined value in engineered low-frequency systems for over ten years. Our newest models deliver enhanced power handling and are smaller than previous models, thanks to the W3v3 & W1v2 subwoofer drivers. Built in our Miramar, Florida factory, utilizing state-of-the-art CNC woodworking equipment, PowerWedge systems feature top-quality MDF construction, steel-mesh grilles, five-way binding post connectors, high-grade automotive carpeting and JL Audio ECS internal wiring.
These compact systems are ideal for a variety of vehicle sizes and deliver tight, powerful bass that will please any audiophile.
The rear-firing PowerWedge systems (5 W3v3 models and 7 W1v2 models) feature an angled back panel to allow the driver(s) to fire toward the back of the vehicle with minimal loss of trunk or hatch space. Systems are available with varying woofer configurations of 10-inch, 12-inch and 13.5-inch subwoofer drivers.
- 1 12" 12W3v3-4 Subwoofers Loaded in a PowerWedge W3v3 Sealed Enclosure with Grille Included
- Power Handling:
- Peak: 1000 watts
- RMS: 500 watts
- Final Impedance: 2 ohms
- Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look
- NBR (Nitrile Butadiene Rubber) surround
- DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output
- Perform outstanding in compact sealed or ported enclosures
- DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range
- Sensitivity: 87 dB
- Free Air Resonance (Fs): 28.28 Hz
- Electrical "Q" (Qes): 0.553
- Mechanical "Q" (Qms): 6.936
- Total Speaker "Q" (Qts): 0.512
- Equivalent Compliance (Vas): 2.729 cu. ft (not recommended box size)
- Xmax Linear Excursion: 0.510 in. / 13.0 mm
- Driver Displacement: 0.071 cu. ft.
- PowerWedge W3v3 Sealed Enclosure with Grille Included
- Sealed, rear-firing
- Made from high quality MDF construction
- Steel mesh grille for the ultimate protection
- Dark gray carpet
- Weight: 30.4 lbs. (13.8 kg)
- Dimensions: 11-3/4"D1 x 6-3/4"D2 x 24"W x 14-1/4"H
SKU# 93196 CS112RG-W3v3 - JL Audio Single 12W3v3-4 Sub in High Output Enclosure CS112RG W3v3