500/1v2 - JL Audio 500 Watt Mono Amplifier

• Patented Technology: High-Damping Class D Circuit with discrete control circuitry
• Differential-Balanced Input Topology: 1 pair of inputs
• On-board Crossover: Fully-variable (40-200 Hz), selectable-slope (12 or 24 dB per octave) LP
• Preamp Output: 2-channel (independent active filter, parallel with amp filter or pass through)
• Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option
• Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz
• Signal-Sensing Turn-On: Permits operation without remote lead
• Dual mono speaker output connections: Accept up to 8 AWG wire
• +12V and Ground connections: Accept up to 4 AWG wire
  
• Rated Power: 500 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V)
• THD at Rated Power: <0.05% @ 4 ohm
• S/N Ratio (All Channels): >95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Frequency Response: 5 Hz - 500 Hz (+0, -1dB)
• Damping Factor: >500 @ 4 ohm / 50 Hz, >250 @ 2 ohm / 50 Hz
• Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
• Dimensions (L x W x H): 13.40 in. x 9.25 in. x 2.36 in.
  

500/1v2 - JL Audio 500 Watt Mono Amplifier 500 / 1 v 2 500-1v2