T112D2 - Rockford Fosgate Power 12" 1200 Watt Dual 2 Ohm Subwoofer

Aluminum Cone/Dust Cap
The application of a Hard anodized cone body and dust cap for the subwoofer offers an ideal combination of strength, weight and thermal capacity. This application allows for superior heat transfer, reduced distortion and higher power handling.

Aluminum V/C Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

Embedded DVC Tinsel Leads
Heavy duty Dual Voice Coil (DVC), multi conductor wires are embedded and stitched through two layers of treated polyester/cotton fabric. This technique ensures Higher current/power handling, Increased flexural strength & Low noise/high excursion operation.

Reversible Mounting
Rockford Fosgate subwoofers can be mounted in either direction. A removable trim ring can be installed on the back or front side of the subwoofer frame. This gives the subwoofer a finished look regardless of mounting configuration.

• Size: 12"
• Impedance: 2-Ohm x 2
• Power Handling: 600 Watts RMS
• Max Power Handling: 1200 Watts Max
• Voice Coil Diameter: 3" anodized aluminum
• Motor Size: 124 oz. double stacked
• Speaker Connector: Dual 8 AWG slot load
• SPL(1w/1m): 86 dB
• Mounting Depth: 6.625 in.
• Shipping Weight: 30.6 Lbs.
• Rec. Sealed Enclosure: 1.25 cu. ft.
• Rec. Vented Enclosure: 2.25 cu. ft.
• Vented Tuning Frequency: 40 Hz