XD600/1v2 - JL Audio Monoblock 600W RMS Class D Amplifier
- SKU #: 00659
Monoblock Class D Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Targeted specifically for subwoofer applications, the XD600/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz.
The XD600/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Features & Specifications:
- XDv2 Series Class D Monoblock Amplifier
- RMS Power Rating @14.4V:
- 4 ohms: 400 watts x 1 chan.
- 3 ohms: 500 watts x 1 chan.
- 2 ohms: 600 watts x 1 chan.
- RMS Power Rating @12.5V:
- 4 ohms: 300 watts x 1 chan.
- 3 ohms: 400 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- NexD™ High Speed Switching Class D Technology
- Wired HD-RLC remote level control available, sold separately
- LED power (green), over-current (yellow) and protect (red) indicators
- Advanced Rollback Protection
- Dual-Range Differential Balanced Input Section
- Buffered pass-through preamp RCA outputs
- Selectable turn-on modes: REM / Offset / Signal
- +12 V Remote Turn-On: Traditional remote lead wire, from headunit
- DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
- Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
- Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy duty aluminum alloy heat-sink for extreme heat dissipation
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Detented, Calibrated Filter Freq. Potentiometer
- 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley Crossover
- Input sensitivity:
- Low level: 800mV - 8V
- High level: 200mV - 2V
- Frequency Response: 7 - 500 Hz
- Total Harmonic Distortion (THD): <1%
- Signal to Noise Ratio: >87 dB
- Damping Factor @4ohms: >1000 / 50 Hz
- Selectable Infrasonic Filter: Off / 30 Hz
- Selectable Low-Pass Filter Slope: 12 dB or 24 dB
- Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave
- Fuse Rating: 50A x 1 inline (not supplied)
- Dimensions: 7.09"W x 8.52"L x 2.05"H
Additional Information
-
Esotec System 342 - Dynaudio 7" 3 Way Component Speakers
Special Price $1,999.99
Retail: $2,529.99
-
Special Price $1,899.99
Retail: $2,599.99
-
Infinity Kappa Perfect 6.5" 600X Motorcycle Speakers for select Harley Davidson
Special Price $549.99
Retail: $599.99
-
DD Audio Digital Designs 712d-D2 12" 3600W Dual 2-Ohm Subwoofer
Special Price $329.00
Retail: $589.99
-
PF.6 - Soundstream 6.5" 100W RMS 2-Way Component Speaker System
Special Price $79.99
Retail: $99.99