XD300/1v2 - JL Audio Monoblock 300W RMS Class D Amplifier

Features & Specifications:

• XDv2 Series Class D Monoblock Amplifier
• RMS Power Rating @14.4V:
• 4 ohms: 200 watts x 1 chan.
• 3 ohms: 250 watts x 1 chan.
• 2 ohms: 300 watts x 1 chan.
• RMS Power Rating @12.5V:
• 4 ohms: 160 watts x 1 chan.
• 3 ohms: 210 watts x 1 chan.
• 2 ohms: 270 watts x 1 chan.
• NexD™ High Speed Switching Class D Technology
• Wired HD-RLC remote level control available, sold separately
• LED power (green), over-current (yellow) and protect (red) indicators
• Advanced Rollback Protection
• Dual-Range Differential Balanced Input Section
• Buffered pass-through preamp RCA outputs
• Selectable turn-on modes: REM / Offset / Signal
• +12 V Remote Turn-On: Traditional remote lead wire, from headunit
• DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
• Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
• Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Detented, Calibrated Filter Freq. Potentiometer
• 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley Crossover
• Input sensitivity:
• Low level: 800mV - 8V
• High level: 200mV - 2V
• Frequency Response: 10 - 1,000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: >100 dB ref. to rated power
• Signal to Noise Ratio: >80 dB ref. to 1W
• Damping Factor @4ohms: >120 / 50 Hz
• Damping Factor @2ohms: >60/ 50 Hz
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave
• Fuse Rating: 30A x 1 inline (not supplied)
• Dimensions: 6.85"W x 7.09"L x 2.05"H