Rockford Fosgate PM1000X5 5-Channel 500W Class AB/BD Punch Series Marine Amplifier

The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

Rockford Fosgate's Moto-marine amplifiers have not only the capabilities you expect a Rockford Fosgate amp to have, but they have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.

• Dust - Rockford makes sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.

• UV Inhibitor Materials - Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.

• Corrosion Protection (Electronics) – Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.

• Stainless Hardware – Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.

Product Features:

• 5-Channel Punch Series Class-bd Marine Amplifier
• RMS Power Rating: 4 Channel + Sub Channel
• 4 ohm: 75 watts x 4 chan. + 150 watts x 1 chan.
• 2 ohm: 125 watts x 4 chan. + 300 watts x 1 chan.
• 1 ohm: (subwoofer channel only) 500 watts x 1 chan.
• Dynamic Power: 4 Channel + Sub Channel
• 4 ohm: 115 watts x 4 chan. + 299 watts x 1 chan.
• 2 ohm: 190 watts x 4 chan. + 540 watts x 1 chan.
• 1 ohm: (subwoofer channel only) 863 watts x 1 chan.
• Includes a Rockford Fosgate Performance Verification Certificate
• w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")
• CEA-2006 compliant amplifier
• LED power (blue) and protect (red) indicators
• Features C.L.E.A.N. Set-up with 10-step set-up procedure
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• 2/4 channel input switch
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• Balanced Differential Inputs, to eliminate noise picked up by signal cables
• Protected against Dust, UV, & Corrosion
• Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
• High level input capable with Auto Turn-On circuit:
• Requires Rockford Fosgate RFIF2SW, sold separately

Product Specifications:

• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• Input sensitivity: 150 mV - 12 V
• F/R Frequency Response: 20 - 20,000 Hz
• Sub Frequency Response: 20 - 500 Hz
• F/R Efficiency (average): 66% @ 4-Ohm
• Sub Efficiency (average): 80% @ 4-Ohm
• Total Harmonic Distortion (THD): <1.0%
• Punch EQ Bass: 0 - +18dB boost @ 45Hz.
• 12dB/octave Butterworth crossover (selectable)
• Variable high-pass filter (F/R): 50 - 250 Hz, 12 dB/octave
• Selectable subsonic/infrasonic filter (Sub): off / 28 Hz, 12 dB/octave
• Variable low-pass filter (Sub): 50 - 250 Hz, 12 dB/octave
• Recommended Fuse Rating: 150A x 1 inline (not included)
• Operating Voltage: 9 - 16 VDC
• Max Current Draw: 150 A
• Average Current Draw: 75 A
• Power Wire Gauge: 4 AWG
• Speaker Wire Gauge: 12 AWG
• Dimensions: 7.76"W x 15.03"L x 2.38"H