JL Audio RBC-1 Remote Bass Control for Select JL Amplifiers

JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio's A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and a 18' cable are included.

Connect the RBC-1 to your amp, and it converts the amp's selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp's boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp's subwoofer level, from full mute to full volume.

Product Features:

• JL Audio RBC-1 Remote Bass Controller Remote Bass Controller for JL Audio Amplifiers.
• The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
• JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D
• HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
• MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
• When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

• Slash v3 Series: 600/1v3, 1200/1v3
• Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
• Original Slash Series: 500/1, 1000/1, 450/4, 500/5
• G-Series: All Models
• A-Series: All Models
• E-Series: All Models (including marine versions)
• M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
• When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.
• The Controller kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.